Airtac TACE Guided Compact Cylinder TACE63X35
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X35 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X35
The TACE63X35 is a double acting, non-rotating compact cylinder built to ISO 21287, pairing a 63 mm bore with a 35 mm stroke in a hard-anodized aluminium body short enough to save about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those figures climb to 2182.1 N and 2041.3 N.
For real-world sizing, treat roughly 935 N as the usable push at 0.5 MPa - that lifts about 79 kg vertically with a 2:1 margin, enough to index a loaded pallet or clamp a heavy weldment. The 16 mm hard-chrome S45C rod ends in an M10x1.5 female thread, ports are 1/8" PT, speed spans 30-500 mm/s across 0.15-1.0 MPa (22-145 psi), and fixed TPU bumpers absorb end-of-stroke shock at both ends. Position sensing needs the optional -S magnet; without it, no CMSE or DMSE switch can be mounted.
Airtac TACE Guided Compact Cylinder TACE63X35 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X35 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X35
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X35 Is Used
Fixture clamp on a CNC machining line
The 35 mm stroke clamps an aluminium gearbox housing against a hard stop, while the 1558.6 N push at 0.5 MPa holds it through roughing cuts and the twin-guide yoke keeps the clamp pad square to the datum.
Lane diverter on a bottling conveyor
Mounted under the guide rail, the short ISO 21287 body fits where a full-length profile cylinder will not, and 935 N of usable push at 0.5 MPa swings a gate to divert PET bottles between two lanes at up to 500 mm/s.
Carton ejection from a case packer
The non-rotating twin guide rods push finished cartons off a magazine without twisting, and the 79 kg vertical-lift equivalent gives margin for a gravity-assisted drop chute on a 2:1 design factor.
Is the Airtac TACE Guided Compact Cylinder TACE63X35 the Right Cylinder?
At 1558.6 N push at 0.5 MPa, the 63 mm bore sits between the 50 mm bore (981.7 N) and the 80 mm bore (2513.3 N) - choose 63 mm when a 50 mm unit runs too close to its limit but 80 mm is oversized for the space. Remember the rod drifts if air is lost, so add a rod lock or pilot check valve wherever a load must stay put. Mount with FB flange, CA/CB clevis, CR or FTC feet, and order the -S code if CMSE / DMSE switches will be used; strokes beyond the 250 mm standard for this bore are made to order.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X35 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N. The theoretical maximum at 1.0 MPa is 317.9 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), and speed runs 30-500 mm/s.
It is an ISO 21287 compact unit whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with FB flange, CA/CB clevis, CR or FTC mounting options and a 1/8" PT port. A fixed TPU bumper at each end absorbs end-of-stroke energy. Position feedback requires the optional -S magnet for CMSE / DMSE switches - without that code no sensor can be fitted - and the rod will drift if air pressure is lost, so use a rod lock or pilot check valve where a held load matters.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.