Airtac TACE Guided Compact Cylinder TACE63X35S
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X35S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X35S
A double acting, non-rotating compact cylinder built to ISO 21287, the TACE63X35S pairs a 63 mm bore with a 35 mm stroke on a hard-anodized aluminium body and an S45C hard-chrome plated 16 mm rod. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or clamp plate stays square without an external guide. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those figures rise to 2182.1 N and 2041.3 N, with a theoretical peak of 317.9 kgf at 1.0 MPa.
Plan on about 935 N of real work at 0.5 MPa, roughly 0.6 of the push rating, which lifts about 79 kg vertically once a 2:1 margin is applied. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Air must be filtered to 40 um; the operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s and -20 to +70 C, with proof pressure of 1.5 MPa (215 psi).
Airtac TACE Guided Compact Cylinder TACE63X35S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X35S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 35 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X35S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X35S Is Used
Clamping welded brackets in a fixture
In a robotic welding cell, the TACE63X35S clamps steel brackets square while the twin-guide yoke keeps the clamp plate from twisting under side load; the 35 mm stroke clears the fixture in tight space.
Reject pusher on a packaging line
Mounted across a carton lane, it pushes off-spec packs off the conveyor at 30-500 mm/s, and the -S magnet with a CMSE or DMSE switch confirms every extend before the next cycle starts.
Lifting aluminium housings under a gantry
With about 79 kg of vertical lift at a 2:1 margin, it raises machined aluminium housings in a pick-and-place station, and the short body fits under the gantry guard where a full-length profile cylinder will not.
Is the Airtac TACE Guided Compact Cylinder TACE63X35S the Right Cylinder?
Size against the load: the 50 mm bore of the same series delivers 981.7 N push at 0.5 MPa, while stepping up to the 80 mm bore reaches 2513.3 N, so the 63 mm sits squarely between them with 1558.6 N. Count on about 935 N of usable push at 0.5 MPa for real work. Remember the cylinder does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve wherever a load must stay put.
Mounting choices are FB flange, CA/CB clevis, CR and FTC, and there is no rod-thread code on the yoke; the rod end is a female M10x1.5 thread and the air ports are 1/8" PT. The -S magnet fitted on this model accepts CMSE / DMSE switches for end-of-stroke signalling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X35S FAQ
At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. For practical sizing, treat about 935 N as the usable push at 0.5 MPa, which corresponds to roughly 79 kg of vertical lift with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Because this model carries the -S magnet, CMSE / DMSE reed or solid-state switches mount directly in the body slots. Mounting options include FB flange, CA/CB clevis, CR and FTC; the rod end is a female M10x1.5 thread and the ports are 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.