Airtac TACE Guided Compact Cylinder TACE63X55S
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X55S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 55mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke55 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X55S
Built as a double acting, non-rotating ISO 21287 compact cylinder, the TACE63X55S delivers 1558.6 N push and 1458.1 N pull at 0.5 MPa, rising to 2182.1 N push and 2041.3 N pull at 0.7 MPa, from a 63 mm bore with a 55 mm stroke. The hard-anodized aluminium body carries a 16 mm S45C rod with hard-chrome plating, the air port is 1/8" and the rod end is a female M10x1.5 thread.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs, guards and gantries. Twin guide rods on a yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide. For sizing, plan on roughly 935 N of usable push at 0.5 MPa, which lifts about 79 kg vertically with a 2:1 margin. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be mounted in the body slots, and a fixed TPU bumper absorbs energy at both ends of travel.
Airtac TACE Guided Compact Cylinder TACE63X55S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X55S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 55 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X55S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×55 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X55S Is Used
Clamping brackets on an automotive weld jig
The 935 N usable push at 0.5 MPa clamps steel brackets firmly, and the twin-guide yoke keeps the clamp pad square to the fixture without a separate guide rail.
Pusher gate on a packaging conveyor
A 55 mm stroke suits diverting cartons between adjacent lanes, the 30-500 mm/s speed band matches line rates, and the short body slots under guarding.
Lifting an access gate on a machine guard
With a 2:1 margin this cylinder lifts about 79 kg vertically, and the fitted -S magnet feeds CMSE / DMSE switches to confirm the gate is fully open.
Is the Airtac TACE Guided Compact Cylinder TACE63X55S the Right Cylinder?
This 63 mm bore sits mid-range: step down to a bore 50 TACE for 981.7 N push at 0.5 MPa, or step up to a bore 80 for 2513.3 N. At 0.7 MPa this model reaches 2182.1 N push, enough for clamping and light press work on a 55 mm stroke. It runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s. It does not hold position when air is lost - the piston drifts - so fit a rod lock or pilot check valve where a load must stay put. Mounting options are FB flange, CA/CB clevis, CR and FTC, with no rod-thread code on the yoke; the -S magnet is already ordered on this model for CMSE / DMSE sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X55S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa that rises to 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi), and speed spans 30-500 mm/s on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which helps in cramped jigs and guarding. A fixed TPU bumper at each end absorbs end-of-stroke energy. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches mount directly in the body slots. The 55 mm stroke is within the 250 mm maximum standard stroke for bore 63, and mounting choices include FB, CA, CB, CR and FTC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X55S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.