Airtac TACE Guided Compact Cylinder TACE63X5S
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X5S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke5 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X5S
Short-body power for tight spaces: the AirTAC TACE63X5S is a double acting, non-rotating compact cylinder built to ISO 21287 with a 63 mm bore and a 5 mm stroke. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or clamping plate stays square without an external guide. At 0.5 MPa the piston pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa that climbs to 2182.1 N push and 2041.3 N pull, with a theoretical 317.9 kgf at 1.0 MPa.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped jigs, guards and gantries where a full-length unit will not fit. Plan on roughly 935 N of usable push at 0.5 MPa - about 0.6 of the rating - which lifts about 79 kg vertically with a 2:1 margin. The fitted -S magnet accepts CMSE / DMSE reed or solid-state switches for end-of-stroke signalling.
Airtac TACE Guided Compact Cylinder TACE63X5S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X5S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 5 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X5S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X5S Is Used
Fixture clamping
Clamps aluminium gearbox housings against a CNC jig in 5 mm of travel; the twin-guide yoke keeps the clamp pad square to the part at 1558.6 N.
Die ejection strike
A short 5 mm kick knocks stamped steel brackets clear of a press die; 2182.1 N at 0.7 MPa clears sticky parts without a long-stroke cylinder.
Packaging pin stop
Acts as a pop-up stop for cartons on a food-line conveyor; the compact body fits inside the side frame and CMSE switches confirm the up position.
Is the Airtac TACE Guided Compact Cylinder TACE63X5S the Right Cylinder?
Need less force? The bore 50 TACE pushes 981.7 N at 0.5 MPa; need more? Bore 80 reaches 2513.3 N. This 63 mm unit sits between them at 1558.6 N push and 1458.1 N pull. Air off means the piston drifts - it never locks or brakes a load, so add a rod lock or pilot check valve where a held position matters. Mounting choices are FB flange, CA/CB clevis, CR and FTC; the rod end is a female M10x1.5 thread and the port is 1/8" PT. The fitted -S magnet lets CMSE / DMSE switches report position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X5S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa the figures rise to 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed runs 30-500 mm/s.
The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper absorbs end-of-stroke shock at both ends. This model carries the -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots. The 1/8" PT port and female M10x1.5 rod thread suit standard fittings; FB, CA, CB, CR and FTC mountings are available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.