Airtac TACE Guided Compact Cylinder TACE63X60S
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X60S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X60S
A double acting, non-rotating compact cylinder to ISO 21287, the TACE63X60S pairs a 63 mm bore and 60 mm stroke with a 16 mm hard-chrome-plated S45C rod and a 1/8" PT port. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa the figures climb to 2182.1 N and 2041.3 N, with a theoretical ceiling of 317.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and gantry frames where a full-length body will not fit. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches clamp straight onto the body for end-of-stroke signalling. For sizing, plan on roughly 935 N of real work at 0.5 MPa - about 95 kg - or budget a vertical lift of about 79 kg with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
Airtac TACE Guided Compact Cylinder TACE63X60S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X60S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X60S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X60S Is Used
Bearing press station
An automotive tier supplier pressing bushings into control-arm housings: the 60 mm stroke covers the insertion depth, 1558.6 N of push at 0.5 MPa handles light press fits, and the twin-guide yoke keeps the punch square to the bore.
Carton clamp on a packing line
Clamping shelf-ready cartons before shrink wrap: the 1458.1 N pull force retracts the clamp pad cleanly between cycles, and the short ISO 21287 body fits between guard panels a longer profile cylinder cannot reach into.
Gantry pick-and-place
Moving aluminium extrusions from saw to deburr station: the non-rotating twin-guide yoke holds the vacuum plate aligned without a separate guide rail, and the fitted -S magnet feeds CMSE switch signals straight to the PLC.
Is the Airtac TACE Guided Compact Cylinder TACE63X60S the Right Cylinder?
If 1558.6 N of push at 0.5 MPa is more than the job needs, step down to the TACE50, which delivers 981.7 N at the same pressure; if the load grows, the TACE80 reaches 2513.3 N. Note that the rod drifts when air is lost - add a rod lock or pilot check valve wherever the load must stay put. The female M10x1.5 rod thread takes standard knuckles and rod attachments, FB flange, CA/CB clevis, CR and FTC mountings cover most frame styles, and because this is the -S version the CMSE / DMSE switch track is ready to use out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X60S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. For real-world sizing, treat about 935 N - roughly 95 kg - as the usable working force at 0.5 MPa, or plan vertical lifts of about 79 kg with a 2:1 margin.
It is an ISO 21287 compact cylinder: the hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with threaded aluminium covers and a fixed TPU bumper at each end. Twin guide rods on a yoke keep the load non-rotating. Mounting options are FB flange, CA/CB clevis, CR and FTC, the rod end is female M10x1.5, and the fitted -S magnet accepts CMSE / DMSE switches. It runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.