Airtac TACE Guided Compact Cylinder TACE63X70
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X70 is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X70
The TACE63X70 is a double acting, non-rotating compact cylinder built to ISO 21287, with a 63 mm bore, 70 mm stroke and a 16 mm S45C hard-chrome plated rod running in a hard-anodized aluminium body. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those figures rise to 2182.1 N and 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting this 63 mm bore slot into tight jigs, guards and gantry frames. Air at 0.15-1.0 MPa (22-145 psi) drives the rod at 30-500 mm/s, and a fixed TPU bumper at each end absorbs end-of-stroke shock. As a rule of thumb, plan for about 935 N of real work at 0.5 MPa - roughly 95 kg - and with a 2:1 margin it lifts about 79 kg vertically. No magnet is fitted on this code: order the optional -S version to enable CMSE / DMSE switches. The port is 1/8" PT and the rod end carries a female M10x1.5 thread.
Airtac TACE Guided Compact Cylinder TACE63X70 Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X70 |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X70
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X70 Is Used
Marking and clinching press
The 1558.6 N push at 0.5 MPa (2182.1 N at 0.7 MPa) over a 70 mm stroke suits stamping date codes or clinching terminals on small aluminium housings, with the twin-guide yoke keeping the punch square to the part.
Carton lane ejector
Mounted across a packaging conveyor, the twin guide rods carry the side load as the pusher plate kicks cartons off a lane, so no external guide rail is needed and the short body fits under the guard.
Fixture lift station
With a 2:1 margin this bore lifts about 79 kg of die inserts or welding fixtures vertically; add a pilot check valve, because the rod drifts down if air pressure is lost.
Is the Airtac TACE Guided Compact Cylinder TACE63X70 the Right Cylinder?
At 1558.6 N push at 0.5 MPa, the 63 mm bore sits in the mid-force band: drop to the 50 mm bore (981.7 N) for lighter clamping, or step up to the 80 mm bore (2513.3 N) when the load grows. The rod does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve wherever a load must stay put. FB flange, CA/CB clevis, CR and FTC mountings are available, and the optional -S magnet lets CMSE / DMSE switches report end positions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X70 FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. Supply air is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed range is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Mounting options are FB flange, CA/CB clevis, CR and FTC. The magnet is optional: order the -S code to fit CMSE or DMSE switches - without -S no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X70
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.