Airtac TACE Guided Compact Cylinder TACE63X70S
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X70S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 70mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke70 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X70S
Double acting and non-rotating, the TACE63X70S pairs a 63 mm bore with a 70 mm stroke in an ISO 21287 compact body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those figures rise to 2182.1 N push and 2041.3 N pull, with a theoretical maximum of 317.9 kgf at 1.0 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or clamp plate stays square without an external guide.
Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and speeds of 30-500 mm/s, plan on roughly 935 N of real work at 0.5 MPa (about 0.6 of the push figure) - that lifts about 79 kg vertically with a 2:1 margin, enough for a loaded fixture plus its tooling. The 16 mm hard-chrome-plated S45C rod ends in a female M10x1.5 thread, ports are 1/8", and a fixed TPU bumper absorbs end-of-stroke energy at each end. Because this model carries the -S magnet, CMSE or DMSE switches can be mounted in the body slots for extend and retract feedback.
Airtac TACE Guided Compact Cylinder TACE63X70S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X70S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 70 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X70S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X70S Is Used
Clamping steel brackets on a CNC milling fixture
The 935 N of usable force at 0.5 MPa holds a machined automotive bracket rigid through roughing cuts, while the 70 mm stroke opens wide enough for a robot to load the next part. Twin guide rods keep the clamp pad square to the datum.
Reject pusher on a bottling line
Mounted across a conveyor, the cylinder kicks off-spec cartons into a reject chute at up to 500 mm/s. The yoke-mounted twin guide rods stop the pusher pad twisting under side load, so it tracks true stroke after stroke.
Lifting a 60 kg gate plate on a packaging machine
With about 79 kg of vertical lift capacity at a 2:1 margin, the TACE63X70S raises and lowers an interlocked guard gate directly - no external guide needed, since the twin rods carry the side load of the gate's own weight.
Is the Airtac TACE Guided Compact Cylinder TACE63X70S the Right Cylinder?
Between the 50 mm bore (981.7 N push at 0.5 MPa) and the 80 mm bore (2513.3 N), the 63 mm TACE63X70S sits in the middle workhorse band: 1558.6 N push and 1458.1 N pull at 0.5 MPa over a 70 mm stroke, with a 16 mm rod and 1/8" ports. It does not hold position when air is lost - the piston drifts - so fit a rod lock or pilot check valve wherever a load must stay suspended. FB flange, CA/CB clevis, CR and FTC mountings all suit the yoke body, and since the -S magnet is fitted on this model, CMSE or DMSE switches can be added without reordering a different code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X70S FAQ
At 0.5 MPa the 63 mm bore pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa push rises to 2182.1 N and pull to 2041.3 N. The theoretical maximum is 317.9 kgf at 1.0 MPa. For sizing, plan on about 935 N of usable force at 0.5 MPa, which lifts roughly 79 kg vertically with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight gantries and guards. A fixed TPU bumper at each end absorbs end-of-stroke energy. Mountings include FB flange, CA/CB clevis, CR and FTC. This model carries the -S magnet, so CMSE or DMSE switches can be clipped into the body slots for position feedback; the 1/8" ports take PT thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X70S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.