Airtac TACE Guided Compact Cylinder TACE63X75S
The AirTAC Airtac TACE Guided Compact Cylinder TACE63X75S is a genuine double acting, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACE Guided Compact Cylinder TACE63X75S
Double acting and non-rotating, the TACE63X75S puts a 63 mm bore to work with 1558.6 N of push and 1458.1 N of pull at 0.5 MPa, rising to 2182.1 N on extension at 0.7 MPa. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square with no external guide. The hard-anodized aluminium body runs a hard-chrome plated S45C rod of 16 mm on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
Its short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 75 mm stroke fits tight jigs and gantry Z-axes. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches clamp straight into the body slots. For sizing, keep real work near 935 N at 0.5 MPa; that is about 79 kg of vertical lift with a 2:1 margin, enough for a loaded aluminium fixture. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the female M10x1.5 rod thread takes standard tooling.
Airtac TACE Guided Compact Cylinder TACE63X75S Technical Specifications
| Model | Airtac TACE Guided Compact Cylinder TACE63X75S |
|---|---|
| Series | TACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 75 mm |
| Acting type | Double acting, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin. Twin guide rods stop the tooling rotating.
Model Code: Airtac TACE Guided Compact Cylinder TACE63X75S
| TACE | ISO 21287 compact cylinder (non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACE Guided Compact Cylinder TACE63X75S Is Used
Gantry Z-axis part lifting
The 75 mm stroke and about 79 kg vertical-lift margin (with a 2:1 factor) suit lifting machined aluminium housings off a CNC fixture; the twin-guide yoke keeps the vacuum plate level through every cycle.
Bracket clamping fixture
Around 935 N of usable clamp force at 0.5 MPa holds a steel bracket through a welding cycle, and the short body slots into a jig where a longer profile cylinder will not fit.
Packaging line reject pusher
1558.6 N at 0.5 MPa shoves off-spec cartons off a conveyor in 75 mm of travel; the non-rotating guide rods keep the pusher pad square to the belt.
Is the Airtac TACE Guided Compact Cylinder TACE63X75S the Right Cylinder?
At 1558.6 N push at 0.5 MPa this 63 mm bore sits between the 40 mm size (628.3 N) and the 80 mm size (2513.3 N); step down when the load is light, up when side load or inertia is high. Air pressure lost means the piston drifts - it does not hold position - so add a rod lock or pilot check valve for a suspended load. Mounting choices are FB flange, CA/CB clevis, CR and FTC; the fitted -S magnet lets CMSE / DMSE switches report end positions without extra brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACE Guided Compact Cylinder TACE63X75S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa the push rises to 2182.1 N with 2041.3 N on the pull side. The theoretical maximum at 1.0 MPa is 317.9 kgf. Plan real work around 935 N at 0.5 MPa, roughly 79 kg of vertical lift with a 2:1 margin.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. This model carries the optional -S magnet, so CMSE or DMSE switches mount in the body slots for position feedback. FB flange, CA/CB clevis, CR and FTC mountings are available, the rod end is a female M10x1.5 thread, and the air port is 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACE Guided Compact Cylinder TACE63X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.