Airtac TACED Guided Compact Cylinder TACED16X75S
The AirTAC Airtac TACED Guided Compact Cylinder TACED16X75S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED16X75S
Double acting and double rod, the TACED16X75S pushes with equal force in both directions because a rod exits each cover and both sides work on the rod-side area: 75.4 N at 0.5 MPa, rising to 105.6 N at 0.7 MPa. Twin guide rods on the yoke keep the tooling from rotating, so a gripper or plate stays square without an external guide. The 16 mm bore carries an 8 mm rod with a female M4x0.7 thread and an M5x0.8 port.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. The hard-anodized aluminium body pairs with an S45C hard-chrome rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Because this model carries the -S magnet, CMSE or DMSE switches can be mounted for position feedback. At 0.5 MPa the usable working force is about 45 N, which lifts roughly 3.8 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED16X75S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED16X75S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED16X75S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED16X75S Is Used
Small-parts ejection from fixtures
The 75.4 N through-rod action kicks machined bushings or stamped clips off a CNC jig, with the twin guide yoke keeping the pusher square to the nest.
Lab sample press and clamp
About 45 N of usable working force at 0.5 MPa clamps vials or test coupons evenly in both directions, and the short ISO 21287 body fits inside a compact enclosure.
Position-verified sorting gate
With the -S magnet fitted, CMSE or DMSE switches confirm gate open and closed on a small-parts conveyor diverter running at 30-500 mm/s.
Is the Airtac TACED Guided Compact Cylinder TACED16X75S the Right Cylinder?
For lighter work, the TACED12X50S delivers 42.4 N at 0.5 MPa; step up to the TACED20X75S for 117.8 N. The 75 mm stroke matches the maximum standard stroke for the 16 mm bore, so no made-to-order length is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must be held. FB flange, CA, CB, CR and FTC mountings are available, and the -S magnet on this model enables CMSE / DMSE switch mounting.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED16X75S FAQ
Yes - the double-rod design means a rod exits both covers, so output is equal both ways: 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, with a maximum of 15.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is M5x0.8.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, freeing space in tight guards and gantries. The S in TACED16X75S means the optional magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clipped onto the body for end-of-stroke sensing. A fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED16X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.