Airtac TACED Guided Compact Cylinder TACED25X10
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X10 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X10
The TACED25X10 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A rod exits both covers, so the 25 mm bore delivers an identical 206.2 N at 0.5 MPa (288.6 N at 0.7 MPa) in each direction, because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling from rotating and carry light side load, so a gripper jaw or press plate stays square with no external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), from -20 to +70 C, at 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 10 mm stroke size slots into cramped pick-and-place heads and small test rigs. A fixed TPU bumper at each end absorbs end-of-stroke shock. For sizing: keep real work near 123 N at 0.5 MPa, and treat it as lifting about 10 kg vertically with a 2:1 margin. The rod end is a female M6x1.0 thread and the port is M5x0.8. Position sensing needs the optional -S magnet code; this unit has no magnet fitted, so CMSE / DMSE switches cannot be mounted unless you order -S.
Airtac TACED Guided Compact Cylinder TACED25X10 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X10 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X10
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X10 Is Used
Small-parts ejection
A 10 mm stroke with 206.2 N each way is enough to kick finished bushings off a CNC fixture into a chute, with the twin guide yoke keeping the pusher square to the nest.
Compact gripper jaw
Equal force in both directions makes the through-rod ideal for a two-jaw gripper on a robotic pick head, where the short body fits inside the wrist envelope.
Lab press and test station
About 10 kg of vertical lift with a 2:1 margin suits light sample pressing or go/no-go gauging on a benchtop rig where a full-length cylinder will not fit.
Is the Airtac TACED Guided Compact Cylinder TACED25X10 the Right Cylinder?
At 206.2 N per direction, the 25 mm bore sits between the 20 mm (117.8 N) and 32 mm (345.6 N) sizes; step down for lighter clamps, up when you need roughly 1.7x the force. The 10 mm stroke suits short indexing and ejection moves. Remember the piston drifts when air is lost - it never holds or locks a load, so add a rod lock or pilot check valve if the position must stay put. Mount with the FB flange, and order the -S code only if you plan to fit CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X10 FAQ
Yes - the double-rod design exposes the rod-side area on both sides, so output is equal in extend and retract: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and gantries. Sensors are possible only with the optional -S magnet code, which enables CMSE / DMSE switches; this model (no S) has no magnet, so no switch can be mounted. A fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.