Airtac TACED Guided Compact Cylinder TACED25X100S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X100S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 100mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke100 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X100S
Double acting and double rod, the TACED25X100S pushes a rod out of BOTH covers of a 25 mm bore, so the force is identical in each direction: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa (rod-side area both ways). Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The optional -S magnet is fitted on this model, letting CMSE / DMSE reed or solid-state switches report position along the body slots.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this 100 mm stroke unit slots into tight jigs, guard rails and gantry frames. A hard-anodized aluminium body with a roller-burnished bore runs an S45C hard-chrome plated rod, and fixed TPU bumpers at each end absorb end-of-stroke shock. At 0.5 MPa plan on roughly 123 N of usable work, and the through-rod will lift about 10 kg vertically with a 2:1 margin - handy when matching a real part weight.
Airtac TACED Guided Compact Cylinder TACED25X100S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X100S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 100 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X100S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X100S Is Used
Bidirectional gripper actuation
Equal 206.2 N grip and release force on the through-rod suits a plastics-mould pick arm where open and close strokes must clamp identically.
Small-parts press station
A 100 mm stroke with twin guide rods keeps a bushing press head square over an electronics assembly fixture without extra guiding.
Indexed test fixture
The fitted -S magnet drives CMSE / DMSE switches for end-of-stroke confirmation on an automotive leak-test rig cycling at 30-500 mm/s.
Is the Airtac TACED Guided Compact Cylinder TACED25X100S the Right Cylinder?
At 206.2 N per direction this 25 mm bore sits between the 20 mm (117.8 N) and the 32 mm (345.6 N) TACED sizes; step down for lighter pick-and-place heads, step up for heavier clamping. Remember it drifts when air is lost - add a rod lock or pilot check valve if the load must be held. The female M6x1.0 rod thread and PT ports suit standard fittings, FB flange mounting is available, and the -S magnet on this code means CMSE / DMSE switches work out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X100S FAQ
Because a rod exits both covers, force is equal in both directions: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa (rod-side area). Peak force at 1.0 MPa is 42.0 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight gantries. This -S model carries the optional magnet, so CMSE / DMSE switches mount in the body slots; fixed TPU bumpers absorb end-of-stroke energy, and FB flange mounting is offered.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.