Airtac TACED Guided Compact Cylinder TACED25X10S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X10S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 10mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke10 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X10S
The TACED25X10S is a double acting, double rod compact cylinder built to ISO 21287: a 25 mm bore with a 10 mm stroke, a rod exiting BOTH covers so the output force is equal in each direction (206.2 N at 0.5 MPa, 288.6 N at 0.7 MPa, rod-side area). Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 25 mm size slots into tight pick-and-place heads and small jigs. Practical sizing: plan on roughly 124 N of usable push at 0.5 MPa (about 0.6 of the rating), which lifts about 10 kg vertically with a 2:1 margin. The S code means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted directly in the body slots, and a fixed TPU bumper absorbs end-of-stroke energy at both ends.
Airtac TACED Guided Compact Cylinder TACED25X10S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X10S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X10S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X10S Is Used
Small-part press fitting
Pressing dowel pins or micro switches into PCB housings on an electronics line, where the equal 206.2 N both ways lets one cylinder seat and retract the part without a return spring.
Bidirectional reject pusher
A conveyor diverter that nudges underweight cosmetic bottles off the line in either direction, with the twin guide rods keeping the pusher pad square to the belt.
Indexed fixture clamping
Clamping small aluminium brackets in a CNC fixture, using the fitted magnet with CMSE switches to confirm clamp and unclamp positions inside a 10 mm window.
Is the Airtac TACED Guided Compact Cylinder TACED25X10S the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, the 25 mm bore sits between the 20 mm (117.8 N) and the 32 mm (345.6 N): step down for lighter sensor-driven slides, step up when the 10 mm rod needs more thrust margin. The 10 mm stroke is well inside the standard range for this bore, so no made-to-order build is needed. Choose FB flange mounting if the yoke must bolt to a fixed plate, and remember the female M6x1.0 rod thread with a PT port. It does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve for a held load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X10S FAQ
Yes - it is a double rod cylinder, so a rod exits both covers and both strokes see the rod-side area. The figures are identical each way: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the port is M5x0.8 with a female M6x1.0 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder will not. This S-version carries the optional -S magnet, so CMSE or DMSE reed / solid-state switches clip into the body slots for end-of-stroke or mid-stroke signals. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange mounting is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.