Airtac TACED Guided Compact Cylinder TACED25X15
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X15 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 15mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X15
A double acting, double rod compact cylinder built to ISO 21287, the TACED25X15 pushes a 25 mm bore through a 15 mm stroke with a rod leaving both covers. Because both sides work on the rod-side area, output is identical in each direction: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa. Twin guide rods on the yoke stop tooling rotation and carry light side load, so a gripper or plate stays square without an external guide.
The hard-anodized aluminium body with an S45C hard-chrome rod shrinks the mounting length to roughly half that of an ISO 15552 profile cylinder, which is why this bore class fits tight jigs, guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke impact. Plan on about 123 N (roughly 12.6 kg of push) for real work at 0.5 MPa, or about 10 kg of vertical lift with a 2:1 margin. The optional -S magnet enables CMSE / DMSE switches; without it no sensor can be fitted.
Airtac TACED Guided Compact Cylinder TACED25X15 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X15 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X15
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X15 Is Used
Fixture clamping in tight dies
The 15 mm stroke and short ISO 21287 body clamp small brackets inside a press die or welding fixture where a full-length profile cylinder cannot fit, delivering 206.2 N per side at 0.5 MPa.
Non-rotating pick-and-place gripper
Twin guide rods keep a small gripper jaw square on a PCB or connector assembly line, while the equal 206.2 N force in both directions simplifies open and close tuning at 30-500 mm/s.
Part presence with position feedback
Order the -S magnet and a CMSE or DMSE switch to confirm a 15 mm eject or reject stroke on a packaging line, with the M5x0.8 port keeping plumbing compact.
Is the Airtac TACED Guided Compact Cylinder TACED25X15 the Right Cylinder?
At 206.2 N per side at 0.5 MPa, the 25 mm bore suits small clamping and part-presenting duties. Step down to the 20 mm bore (117.8 N) for lighter tooling, or up to the 32 mm bore (345.6 N) when the load grows. The 15 mm stroke is well inside the 100 mm standard range for this bore. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must be held. FB flange mounting is available, and the female M6x1.0 rod thread on the yoke takes standard tooling directly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X15 FAQ
Yes. As a double rod cylinder, a rod exits both covers and both sides act on the rod-side area, so force is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the bore takes an M5x0.8 port with a female M6x1.0 rod thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped jigs and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy. Sensing is optional: order the -S version with the built-in magnet to use CMSE or DMSE switches; the standard TACED25X15 has no magnet, so no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.