Airtac TACED Guided Compact Cylinder TACED25X15S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X15S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 15mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke15 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X15S
Double acting with a rod leaving both covers, the TACED25X15S pushes and pulls with identical force: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in each direction, because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or plate stays square with no external guide. The 15 mm stroke suits short indexing moves at 30-500 mm/s.
The body is the ISO 21287 compact format in hard-anodized aluminium, cutting about 50% of the mounting length of an ISO 15552 profile cylinder, which matters in tight jigs and guarded cells. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped anywhere along the body slots. A fixed TPU bumper at each end absorbs end-of-stroke shock. For planning, treat roughly 124 N (about 0.6 of the rating) as usable force at 0.5 MPa, which corresponds to lifting about 10 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED25X15S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X15S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X15S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X15S Is Used
Pick-and-place gripper
The through-rod gives equal grip force opening and closing at 206.2 N, while the twin guide yoke keeps small electronic parts from twisting in the jaws.
Short-stamp marking jig
A 15 mm stroke is ideal for dot-peen or ink stamps on brackets; the compact body tucks into a press fixture where a longer cylinder will not fit.
Position-verified ejector
With the fitted -S magnet and CMSE / DMSE switches, a PLC confirms extend and retract on a packaging line reject chute without external proximity parts.
Is the Airtac TACED Guided Compact Cylinder TACED25X15S the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, the 25 mm bore sits between the 20 mm (117.8 N) and 32 mm (345.6 N) sizes; step up if your tooling mass needs more than about 124 N of working force. The 15 mm stroke is well inside the standard range for this bore, so no made-to-order build is needed. This model already carries the optional -S magnet, so add CMSE or DMSE switches when ordering. Mounting is FB flange; the rod end is female M6x1.0 and the air port is M5x0.8. Remember the piston drifts if air is lost, so fit a rod lock or pilot check valve where a load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X15S FAQ
Yes. Because a rod exits both covers, both directions work on the rod-side area: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa either way, with a peak of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and S45C hard-chrome rod, about 50% shorter in mounting length than an ISO 15552 profile cylinder. A fixed TPU bumper at each end absorbs end-of-stroke shock. This model carries the optional -S magnet, so CMSE / DMSE switches mount in the body slots; FB flange mounting is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.