Airtac TACED Guided Compact Cylinder TACED25X25
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X25 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 25mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke25 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X25
The TACED25X25 is a double acting, double-rod compact cylinder built to ISO 21287: a rod leaves both covers, so the 25 mm bore delivers the same 206.2 N at 0.5 MPa (288.6 N at 0.7 MPa) whether it pushes or pulls. Twin guide rods on the yoke stop the tooling from rotating and carry side load, so a gripper or plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated 10 mm rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body will not fit. At 0.5 MPa the rod-side area gives roughly 21 kgf, so halving for a 2:1 margin means this unit lifts about 10 kg vertically; plan on about 124 N of real work rather than the full 206.2 N rating. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches when ordered.
Airtac TACED Guided Compact Cylinder TACED25X25 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X25 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X25
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X25 Is Used
Gripper actuation on assembly cells
Equal 206.2 N grip and release at 0.5 MPa with no rotation from the twin guide rods keeps small part grippers square on an electronics assembly line.
Short-stamp marking of date codes
The 25 mm stroke and about 10 kg vertical lift capacity suit light dot-peen or ink stamping of date codes on packaged goods at 0.5 MPa.
Push-part ejection from fixtures
A through rod ejects machined parts from a drill jig with identical force in both directions, and the short body fits inside the fixture footprint.
Is the Airtac TACED Guided Compact Cylinder TACED25X25 the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, the 25 mm bore sits between the 20 mm bore (117.8 N) and the 32 mm bore (345.6 N) - pick 20 for lighter pick-and-place, 32 when the load climbs past about 124 N of usable force. The 25 mm stroke suits short indexing moves; bore 25 accepts standard strokes up to 150 mm, so longer travel stays standard. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must be held. Mounting is FB flange, and the optional -S magnet is what allows CMSE / DMSE switch sensing; without it no sensor can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X25 FAQ
Yes - the double-rod design means both strokes see the rod-side area, so output is equal either way: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the piston will drift if air is lost, so use a rod lock or pilot check valve to hold a load.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB flange mounting. Position sensing needs the optional -S magnet code - order TACED25X25S and CMSE / DMSE switches can be mounted on the body slots; the base model has no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X25
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.