Airtac TACED Guided Compact Cylinder TACED25X30
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X30 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 30mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X30
Double acting and double rod, the TACED25X30 pushes a 10 mm rod out of BOTH covers, so the 25 mm bore delivers an identical 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in each direction. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper jaw or press plate stays square without an external guide. Speed range is 30-500 mm/s and pressure runs 0.15-1.0 MPa (22-145 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 30 mm stroke unit slots into tight jigs, guarding and gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock. For sizing, treat roughly 123 N (about 0.6 of the rated force) as usable work at 0.5 MPa, and expect around 10 kg of vertical lift with a 2:1 margin. The hard-anodized aluminium body carries an S45C hard-chrome plated rod; the magnet is the optional -S code, not fitted on this model.
Airtac TACED Guided Compact Cylinder TACED25X30 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X30 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X30
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X30 Is Used
Fixture clamping on CNC pallets
Equal 206.2 N clamp and release in both directions lets one 25 mm cylinder swing a clamp arm over and back on a machining fixture without a return spring.
Gripper jaws on assembly robots
The twin guide yoke keeps gripper jaws from rotating when picking connector housings, so no external guide rail is needed at 30 mm stroke.
Lab sample pusher stations
Compact 30 mm stroke and the short ISO 21287 body fit inside benchtop analyser enclosures where a full-length profile cylinder will not.
Is the Airtac TACED Guided Compact Cylinder TACED25X30 the Right Cylinder?
At 206.2 N per direction this bore 25 unit sits between the 20 mm (117.8 N) and 32 mm (345.6 N) TACED sizes, so step down for lighter pick-and-place heads or up for heavier clamping. If the load must stay put when air is lost, add a rod lock or pilot check valve - the piston drifts without one. Mounting is FB flange; order the -S variant if CMSE / DMSE switching is planned, since this standard code carries no magnet. Rod end is female M6x1.0, port PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X30 FAQ
Yes - the double rod design means a rod exits both covers and both sides see the rod-side area, so output is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Sensing requires the optional -S magnet code; this standard TACED25X30 has no magnet, so CMSE / DMSE switches cannot be read until you order the -S version.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.