Airtac TACED Guided Compact Cylinder TACED25X45S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X45S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 45mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke45 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X45S
This is a double acting, double-rod compact cylinder built to ISO 21287: a rod leaves both covers, so the 25 mm bore delivers the same 206.2 N at 0.5 MPa (288.6 N at 0.7 MPa) whichever way the piston moves. Twin guide rods on the yoke keep the tooling from rotating and carry side load, so a gripper or plate stays square without an external guide. The -S magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches can be mounted directly on the body slots.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight jigs and guarded stations. A fixed TPU bumper at each end absorbs end-of-stroke energy. For planning, treat roughly 0.6 of the 206.2 N rating as usable work at 0.5 MPa, about 124 N, which corresponds to lifting roughly 6 kg vertically with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
Airtac TACED Guided Compact Cylinder TACED25X45S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X45S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X45S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X45S Is Used
Fixture clamping on CNC pallets
The 206.2 N clamping force in both directions and 45 mm stroke suit pallet clamps where the fixture must be pushed and released through the same compact envelope.
Pick-and-place gripper actuation
Twin guide rods stop the gripper rotating while the through-rod gives equal grip and release force, ideal for small electronics housings on assembly cells.
Position feedback on test rigs
With the fitted -S magnet, CMSE / DMSE switches report end-of-stroke or mid-stroke positions on leak-test and functional-check stations.
Is the Airtac TACED Guided Compact Cylinder TACED25X45S the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, this 25 mm bore sits between the 20 mm bore (117.8 N) and the 32 mm bore (345.6 N); step up to 32 mm if your clamp needs more margin. Note it does not hold position when air is lost - add a rod lock or pilot check valve for a held load. The female M6x1.0 rod thread and PT ports suit standard fittings, and FB flange mounting is available if you need a bolted face rather than the body slots.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X45S FAQ
Yes. Because a rod exits both covers, both sides work on the rod-side area, so force is equal in extend and retract: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction. Maximum force at 1.0 MPa is 42.0 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, at speeds of 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder will not. The S in TACED25X45S means the optional magnet is fitted, enabling CMSE / DMSE reed or solid-state switches on the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the female M6x1.0 rod thread takes standard tooling.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.