Airtac TACED Guided Compact Cylinder TACED25X50S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X50S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 50mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke50 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X50S
Double acting and double rod, the TACED25X50S pushes a rod out of both covers of its ISO 21287 compact body, so the 25 mm bore delivers an identical 206.2 N in each direction at 0.5 MPa (288.6 N at 0.7 MPa) because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and take side load, keeping a gripper or plate square without an external guide. The magnet fitted under the -S code lets CMSE / DMSE reed or solid-state switches report position.
The hard-anodized aluminium body with an S45C hard-chrome plated 10 mm rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, and -20 to +70 C, with a fixed TPU bumper at each end. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. For sizing, plan on roughly 124 N (about 12.6 kgf) of usable push at 0.5 MPa, and expect it to lift about 10 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED25X50S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X50S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X50S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X50S Is Used
Fixture clamping on a CNC jig
The 206.2 N clamping force in both directions clamps and releases a machined bracket in a drill jig, while the twin guide rods keep the clamp pad square to the datum.
Pusher on a packaging line
A 50 mm stroke pushes cartons sideways off a conveyor at up to 500 mm/s, and the -S magnet with a DMSE switch confirms each push for the line PLC.
Lab sample press
The compact body, about 50% shorter than an ISO 15552 profile cylinder, fits inside a benchtop enclosure where the 10 kg vertical-lift class handles small sample trays.
Is the Airtac TACED Guided Compact Cylinder TACED25X50S the Right Cylinder?
At 206.2 N per side, this 25 mm unit sits between the 20 mm bore (117.8 N at 0.5 MPa) and the 32 mm bore (345.6 N at 0.5 MPa); step up if your clamping needs more than about 124 N of working force. The 50 mm stroke is well inside the 100 mm standard limit for this bore, so it ships as a catalogue item. Choose FB flange, CA, CB, CR or FTC mounting, PT ports, and note the female M6x1.0 rod thread. It does not hold position when air is lost - add a rod lock or pilot check valve for a held load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X50S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes work on the rod-side area. Output is 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction, with a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the bore takes an M5x0.8 port.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, threaded aluminium covers, an S45C hard-chrome 10 mm rod and a fixed TPU bumper at each end of the 50 mm stroke. This -S version carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be clipped into the body slots to signal end positions. Mounting choices are FB flange, CA, CB, CR and FTC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.