Airtac TACED Guided Compact Cylinder TACED25X60
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X60 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X60
Double acting and double rod, the TACED25X60 pushes a rod out of both covers, so this 25 mm bore delivers an equal 206.2 N in each direction at 0.5 MPa (288.6 N at 0.7 MPa) because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide. The rod end is female M6x1.0 and the air port is M5x0.8.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with an S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s. As a sizing rule, plan on roughly 124 N of real work at 0.5 MPa, which lifts about 10 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED25X60 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X60 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X60
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X60 Is Used
Fixture clamping from both sides
The 60 mm double rod clamps a machined housing in a drilling jig with 206.2 N on each side, so one cylinder replaces two and the twin guide yoke keeps the clamp pads square to the part.
Bidirectional pusher on a packaging line
A rod exits each cover, so the same 288.6 N at 0.7 MPa diverts cartons left or right on a conveyor without reversing plumbing, at line speeds up to 500 mm/s.
Non-rotating gripper plate
Twin guide rods carry the side load of a small pick-and-place gripper handling 10 kg parts, holding orientation without an external guide rail in a compact cell.
Is the Airtac TACED Guided Compact Cylinder TACED25X60 the Right Cylinder?
At 206.2 N per side, the 25 mm bore sits between the 20 mm (117.8 N) and 32 mm (345.6 N) classes at 0.5 MPa. Step down to 20 mm for lighter pick-and-place heads, or up to 32 mm when the load needs more than about 124 N of usable force. The 60 mm stroke is within the 100 mm standard range for this bore, so it ships as a standard build. Remember it drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mounting is FB flange, and the optional -S magnet enables CMSE / DMSE switches; without -S no magnet is fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X60 FAQ
Yes - the double-rod design exposes the rod-side area on both sides, so output is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. For sensing, order the optional -S magnet version, which allows CMSE or DMSE switches along the body slots; the standard TACED25X60 has no magnet fitted. Mounting is FB flange, and the piston does not hold position on air loss - use a rod lock or pilot check valve for held loads.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.