Airtac TACED Guided Compact Cylinder TACED25X60S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X60S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X60S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED25X60S pushes a 10 mm rod out of both covers, so the 25 mm bore delivers 206.2 N in each direction at 0.5 MPa and 288.6 N at 0.7 MPa - identical push and pull because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide.
The hard-anodized aluminium body with an S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C, with a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE / DMSE switches can be mounted for end-of-stroke sensing. Plan on roughly 124 N of usable working force at 0.5 MPa, which lifts about 10 kg vertically with a 2:1 margin. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs and gantries.
Airtac TACED Guided Compact Cylinder TACED25X60S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X60S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X60S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X60S Is Used
Fixture clamping in CNC cells
The twin guide rods hold a clamp plate square over the 60 mm stroke while 206.2 N per side at 0.5 MPa secures aluminium housings for machining.
Bidirectional push station
Equal 288.6 N force at 0.7 MPa in both directions lets one cylinder eject a part then return the pallet on the same stroke - no second cylinder needed.
Gantry part presence checks
With the -S magnet fitted, CMSE or DMSE switches confirm end positions on a compact body that fits where an ISO 15552 profile cylinder cannot.
Is the Airtac TACED Guided Compact Cylinder TACED25X60S the Right Cylinder?
At 206.2 N per side at 0.5 MPa, the 25 mm bore suits clamping and transfer tasks in the 12-20 kg class; step down to the 20 mm bore (117.8 N) for lighter tooling or up to the 32 mm bore (345.6 N) when the load grows. The 60 mm stroke sits well inside the standard range for this bore, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. FB flange mounting and the fitted -S magnet for CMSE / DMSE switches round out the spec; the rod end is female M6x1.0 with a PT port thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X60S FAQ
Yes - the double-rod design means a rod exits both covers, so force is equal in both directions at 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa (rod-side area). Maximum output at 1.0 MPa is 42.0 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, bore 25 mm, stroke 60 mm, rod 10 mm, port M5x0.8, female rod thread M6x1.0.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight guards and jigs. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not adjustable and never holds a load. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount directly on the body slots. FB flange mounting is available; confirm exact outline dimensions from the datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.