Airtac TACED Guided Compact Cylinder TACED25X75S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X75S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X75S
Double acting and double rod, the TACED25X75S pushes a rod out of both covers of its ISO 21287 compact body, so the 25 mm bore delivers an identical 206.2 N in each direction at 0.5 MPa (288.6 N at 0.7 MPa, up to 42.0 kgf at 1.0 MPa). Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or plate square without an external guide. A fixed TPU bumper at each end absorbs end-of-stroke energy.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs, guards and gantries. This -S model carries the optional magnet, so CMSE / DMSE reed or solid-state switches can be clamped straight onto the body for end-of-stroke detection. As a working figure, plan on roughly 124 N of real work at 0.5 MPa, and halving the lift equivalent means it raises about 10.5 kg vertically with margin.
Airtac TACED Guided Compact Cylinder TACED25X75S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X75S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X75S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X75S Is Used
Fixture clamping in machining cells
The 206.2 N through-rod force clamps a small aluminium bracket from both sides in a CNC fixture, and the twin guide yoke keeps the clamp pad square to the part.
Sorting pusher on packaging lines
A 75 mm stroke kicks misaligned cartons sideways off a conveyor; equal force both ways lets the same cylinder push and retract at identical speed under 0.5 MPa.
Position-checked test station
With the -S magnet fitted, CMSE or DMSE switches confirm both end positions of a 10.5 kg vertical lift check, all inside a body about 50% shorter than an ISO 15552 profile cylinder.
Is the Airtac TACED Guided Compact Cylinder TACED25X75S the Right Cylinder?
At 206.2 N both ways at 0.5 MPa, the 25 mm bore sits between the 20 mm (117.8 N) and the 32 mm (345.6 N); step down for lighter pick-and-place, up if the tooling needs more grip. The 75 mm stroke is within the standard range for this bore, so no made-to-order build is needed. It does not hold position if air is lost - the piston drifts - so add a rod lock or pilot check valve for a held load. FB flange mounting and the fitted -S magnet with CMSE / DMSE switches cover sensing; PT ports as standard, G on request.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X75S FAQ
Yes - the double-rod design means both strokes see the rod-side area, so output is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
It is an ISO 21287 compact cylinder whose short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a 10 mm hard-chrome S45C rod and M5x0.8 ports. This -S version carries the optional magnet, so CMSE / DMSE switches mount on the body slots. A fixed TPU bumper at each end decelerates the piston; it is not adjustable and never locks a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.