Airtac TACED Guided Compact Cylinder TACED25X80
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X80 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 80mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X80
A double acting compact cylinder built to ISO 21287, the TACED25X80 pushes a 25 mm bore through an 80 mm stroke with a rod leaving BOTH covers, so the output force is identical in each direction: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa on the rod-side area. Twin guide rods on a yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs, guards and gantries. For sizing, treat roughly 123 N (about 0.6 of the 206.2 N rating) as the usable working force at 0.5 MPa, which equates to lifting about 6 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the optional -S magnet enables CMSE / DMSE switches; without the -S code no magnet is fitted.
Airtac TACED Guided Compact Cylinder TACED25X80 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X80 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X80
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X80 Is Used
Fixture clamping in tight jigs
The 80 mm stroke and short ISO 21287 body let the TACED25X80 clamp workpieces inside crowded machining fixtures where a full-length profile cylinder cannot fit, delivering 206.2 N on both the clamp and release stroke.
Squaring a pick plate on a gantry
Twin guide rods keep a vacuum or pick plate from rotating as the cylinder extends 80 mm, so parts stay aligned without adding an external guide - useful on electronics and small-assembly gantries.
Lab press and sample ejector
With about 123 N of usable force at 0.5 MPa, the 25 mm double-rod unit ejects sample trays or presses small test coupons in laboratory and QC equipment, retracting with the same 206.2 N for positive return.
Is the Airtac TACED Guided Compact Cylinder TACED25X80 the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, the 25 mm bore sits between the 20 mm bore (117.8 N) and the 32 mm bore (345.6 N); step down for lighter clamping, up when the load approaches 120 N working force. The 80 mm stroke is within the standard range for this bore, so no made-to-order build is needed. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay held. Order the -S code if CMSE / DMSE position sensing is planned, and pick FB flange, CA, CB, CR or FTC mounting to suit the machine frame. Female M6x1.0 rod thread, PT ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X80 FAQ
Because a rod exits both covers, output is equal both ways on the rod-side area: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 80 mm stroke is a standard length for the 25 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits cramped jigs and guards. Sensing is possible only if you order the optional -S magnet version, which then accepts CMSE / DMSE switches; the standard TACED25X80 has no magnet fitted. A fixed TPU bumper at each end absorbs end-of-stroke energy, and mounting choices include FB flange, CA, CB, CR and FTC.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.