Airtac TACED Guided Compact Cylinder TACED25X80S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X80S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 80mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke80 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X80S
Double acting and double rod, the TACED25X80S pushes a 25 mm piston through an 80 mm stroke with a rod leaving BOTH covers, so the force is identical in each direction: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or plate stays square without an external guide - a real edge over a plain compact cylinder. The -S code on this model means the magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped anywhere along the body slots.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 80 mm stroke version still fits shallow jigs, guarding and gantries. For sizing, treat roughly 0.6 of the rated force as usable work - about 124 N at 0.5 MPa - which equals lifting roughly 6 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
Airtac TACED Guided Compact Cylinder TACED25X80S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X80S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X80S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X80S Is Used
Fixture clamping on CNC jigs
The 206.2 N clamping force in both directions suits hold-down plates on machining jigs, where the twin guide yoke keeps the clamp pad square to the part.
Pusher on packaging lines
An 80 mm stroke with equal push and pull moves cartons or trays sideways on a conveyor, and the short body fits the tight gap beside the belt frame.
Position-monitored gate on a test rig
With the fitted -S magnet, CMSE or DMSE switches confirm gate open and closed on an automated inspection station without any external proximity hardware.
Is the Airtac TACED Guided Compact Cylinder TACED25X80S the Right Cylinder?
At 206.2 N per direction this 25 mm bore sits between the 20 mm TACED (117.8 N) and the 32 mm TACED (345.6 N) at 0.5 MPa, so step up to 32 mm if your clamp needs more margin or down to 20 mm to save space. The 80 mm stroke is within the 150 mm standard range for this bore, so no made-to-order build is needed. Remember it drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FB flange, CA, CB, CR and FTC mountings are available, and the fitted -S magnet lets CMSE / DMSE switches report position. Rod end is female M6x1.0; ports are M5x0.8.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X80S FAQ
Yes - because a rod exits both covers, both directions work on the rod-side area, so output is equal either way: 206.2 N at 0.5 MPa, 288.6 N at 0.7 MPa, and a maximum of 42.0 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C.
It is an ISO 21287 compact build whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB, CA, CB, CR or FTC mounting options. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches mount in the body slots for end-of-stroke or mid-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.