Airtac TACED Guided Compact Cylinder TACED25X90S
The AirTAC Airtac TACED Guided Compact Cylinder TACED25X90S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø25mm bore and 90mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ25 mm
- Stroke90 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED25X90S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED25X90S pushes a 25 mm bore through a 90 mm stroke with a rod leaving both covers, so the output force is identical in each direction: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling rotating and take side load, letting a gripper or press plate stay square without an external guide. The hard-anodized aluminium body pairs with an S45C hard-chrome plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock.
Because the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 90 mm stroke model slots into tight jigs, guards and gantries. A practical sizing check: plan on roughly 124 N of real work at 0.5 MPa, which is about 12 kgf, so halving for margin it lifts around 6 kg vertically. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the body. Ports are M5x0.8, pressure runs 0.15-1.0 MPa (22-145 psi), and speed spans 30-500 mm/s.
Airtac TACED Guided Compact Cylinder TACED25X90S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED25X90S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED25X90S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 25 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED25X90S Is Used
Push-pull fixture clamping
Equal 206.2 N force in both directions lets one TACED25X90S clamp and release a machining fixture without a return spring, while the twin guide yoke keeps the clamp pad square to the part.
Small-part diverting on packaging lines
The 90 mm stroke kicks cartons or blisters off a conveyor at up to 500 mm/s, and the fitted -S magnet with a CMSE switch confirms the diverter reached each end.
Lab sample handling gantry
With about 6 kg vertical lift capacity at a 2:1 margin, the non-rotating double rod raises and lowers sample trays inside a compact gantry where a full-length profile cylinder will not fit.
Is the Airtac TACED Guided Compact Cylinder TACED25X90S the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, the 25 mm bore sits between the 20 mm bore (117.8 N) and the 32 mm bore (345.6 N), so step up to 32 mm if your fixture needs closer to 350 N. The 90 mm stroke is within the 150 mm standard range for bore 25, so no made-to-order stroke is needed. Remember the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. FB flange mounting is available, and this -S model already carries the optional magnet for CMSE / DMSE switch position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED25X90S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes see the rod-side area. Output is 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction, with a maximum of 42.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for tight jigs and gantries, and the fixed TPU bumpers at both ends absorb end-of-stroke shock. This -S version carries the optional magnet, so CMSE or DMSE reed or solid-state switches mount directly on the body slots for end-of-stroke or mid-stroke sensing. FB flange mounting is offered, and the female rod thread is M6x1.0.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED25X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.