Airtac TACED Guided Compact Cylinder TACED32X10
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X10 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X10
A double acting, double-rod compact cylinder built to ISO 21287, the TACED32X10 pushes and pulls with the same 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) because a rod exits both covers and both strokes work on the rod-side area. The 32 mm bore drives a 12 mm through-rod over a short 10 mm stroke, with twin guide rods on a yoke stopping tooling rotation and carrying side load, so a gripper or plate stays square without an external guide.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C, with a fixed TPU bumper at each end. In practice, plan on roughly 207 N of usable work at 0.5 MPa, which is about 17 kg held vertically with a 2:1 margin. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. No magnet is fitted; order the optional -S code if you need CMSE / DMSE switch sensing.
Airtac TACED Guided Compact Cylinder TACED32X10 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X10 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X10
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X10 Is Used
Fixture clamping
The equal 345.6 N clamp and release force both ways suits a 10 mm clamp-and-clear move on a CNC milling fixture, with the twin guide yoke keeping the clamp pad square to the part.
Pusher on a packaging line
A short 10 mm kick to divert cartons or blisters at a conveyor junction, where the compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder.
Small pick gripper drive
Driving a two-jaw gripper on an electronics assembly cell: about 17 kg can be held vertically with a 2:1 margin, and the non-rotating yoke stops the jaws spinning.
Is the Airtac TACED Guided Compact Cylinder TACED32X10 the Right Cylinder?
At 345.6 N per direction at 0.5 MPa, the 32 mm bore suits clamping and positioning where a 20 mm bore (117.8 N) is too light and a 40 mm bore (571.8 N) is more than the job needs. The 10 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so it ships as a standard build.
The rod ends carry a female M8x1.25 thread and the air port is 1/8" PT. Mount with the FB flange if you need a bolted face; the yoke has no rod-thread option. Remember the piston drifts when air is lost, so add a rod lock or pilot check valve for a held load, and order the -S magnet code only if CMSE / DMSE sensing is required.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X10 FAQ
Yes. Because it is a double-rod cylinder with a rod exiting both covers, output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.
It is an ISO 21287 compact build: hard-anodized aluminium body, S45C hard-chrome rod, threaded aluminium covers and a fixed TPU bumper at each end that decelerates the piston. Sensing is possible only with the optional -S magnet code, which allows CMSE / DMSE switches; the base TACED32X10 has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.