Airtac TACED Guided Compact Cylinder TACED32X10S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X10S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X10S
Double acting with a through rod exiting both covers, the TACED32X10S delivers 345.6 N at 0.5 MPa in either direction, because both strokes work on the rod-side area of the 32 mm bore. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 10 mm stroke suits short clamp-and-release moves at 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. The hard-anodized aluminium body carries a hard-chrome S45C rod, with a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE / DMSE switches can be mounted for end-of-stroke signals. For planning, treat roughly 207 N (about 21 kg equivalent) as the usable working force at 0.5 MPa.
Airtac TACED Guided Compact Cylinder TACED32X10S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X10S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X10S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X10S Is Used
Fixture clamping on CNC pallets
The 345.6 N through-rod clamps a machined housing from both sides in one body, and the twin guide yoke keeps the clamp shoe square to the datum.
Carton push-off on a case packer
A 10 mm stroke is ideal for kicking a formed carton off a vacuum plate; equal force both ways means the return stroke ejects just as hard.
Presence check with switch feedback
With the -S magnet fitted, CMSE or DMSE switches confirm the part is seated when the short 10 mm stroke bottoms out inside a guarding panel.
Is the Airtac TACED Guided Compact Cylinder TACED32X10S the Right Cylinder?
At 32 mm bore the TACED32X10S sits mid-range: step down to the TACED25X10S for 206.2 N at 0.5 MPa, or up to the TACED40X10S for 571.8 N when the clamp needs more grip. Force is identical on both strokes, so sizing is the same whichever way the load moves. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a held position matters. The 1/8" port, PT thread and FB flange mounting cover most jig builds, and the -S magnet on this model enables CMSE / DMSE switch feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X10S FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, on the rod-side area of the 32 mm bore. At the full 1.0 MPa rating the cylinder reaches about 70.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow pockets and guarded zones. The S in the model code means the optional magnet is fitted, allowing CMSE / DMSE reed or solid-state switches for position signals. Ends are decelerated by fixed TPU bumpers, and the female M8x1.25 rod thread with FB flange mounting keeps installation simple.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.