Airtac TACED Guided Compact Cylinder TACED32X15
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X15 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X15
The TACED32X15 is a double acting, double-rod compact cylinder built to ISO 21287: a 32 mm bore with a 12 mm rod exiting BOTH covers, so the output force is equal in both directions at 345.6 N per side at 0.5 MPa (483.8 N at 0.7 MPa). Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or plate square with no external guide. The 15 mm stroke suits short, fast moves at 30-500 mm/s.
The hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, with a fixed TPU bumper at each end. In practice, plan on roughly 207 N of usable work at 0.5 MPa (about 60% of rating), which lifts around 10 kg vertically with a 2:1 margin. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs and gantries.
Airtac TACED Guided Compact Cylinder TACED32X15 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X15 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X15
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X15 Is Used
Push-pull ejection in assembly jigs
The through-rod pushes a formed terminal out of a nest and retracts with the same 345.6 N at 0.5 MPa, so one air line does both jobs on a 15 mm stroke.
Synchronous gripper actuation
Twin guide rods keep the jaws of a small plastics-part gripper from rotating, gripping square on both open and close strokes without an external guide.
Short-stamp marking press
A 15 mm stroke and 483.8 N at 0.7 MPa both ways suits a date-code stamp on cartons, where the compact body fits under a low guard frame.
Is the Airtac TACED Guided Compact Cylinder TACED32X15 the Right Cylinder?
At 32 mm bore this unit sits between the 25 mm TACED (206.2 N at 0.5 MPa) and the 40 mm TACED (571.8 N at 0.5 MPa); step up if your tooling needs more than about 200 N of working force. The 15 mm stroke is a standard length for this bore. Note the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mounting is FB flange; order the -S code if you later want CMSE / DMSE switches, since this model has no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X15 FAQ
Yes - the double-rod design means both strokes act on the rod-side area, so output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FB flange mounting. Sensing is not fitted on this model: order the -S variant to get the optional magnet, then CMSE or DMSE switches can be clipped into the body slots. Without -S there is no magnet and no switch can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.