Airtac TACED Guided Compact Cylinder TACED32X25S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X25S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X25S
Double acting and double rod, the TACED32X25S pushes a rod out of both covers of its ISO 21287 compact body, so the 32 mm bore delivers an identical 345.6 N in each direction at 0.5 MPa (483.8 N at 0.7 MPa) because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and take side load, keeping a gripper or plate square without an external guide. The magnet fitted under the -S code lets you bolt on CMSE or DMSE reed or solid-state switches for end-of-stroke signalling.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarded gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the S45C hard-chrome rod runs at 30-500 mm/s on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi). As a rule of thumb, plan on roughly 207 N of real work at 0.5 MPa, and in vertical terms that is about 17 kg of lifted part weight with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED32X25S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X25S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X25S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X25S Is Used
Fixture clamping in a CNC jig
The twin guide yoke keeps a clamp plate square over the 25 mm stroke, and the 345.6 N per side at 0.5 MPa secures a machined housing without an external guide.
Bidirectional pusher on a packaging line
A rod exits both covers, so the same 483.8 N at 0.7 MPa kicks cartons left or right, and CMSE switches on the -S magnet confirm each reject stroke.
Compact gripper actuator in an assembly cell
The short body, about 50% shorter than an ISO 15552 profile cylinder, fits inside a tight gantry while lifting about 17 kg vertically with a 2:1 margin.
Is the Airtac TACED Guided Compact Cylinder TACED32X25S the Right Cylinder?
At 345.6 N per side at 0.5 MPa, the 32 mm bore sits between the 25 mm TACED (206.2 N) and the 40 mm TACED (571.8 N), so pick 32 when a compact pick-and-place needs mid-range force in both directions. The 25 mm stroke keeps the body very short; bore 32 accepts standard strokes up to 200 mm if you later need more travel. It does not hold position when air is lost - the piston drifts - so add a rod lock or pilot check valve for a held load. FB flange mounting is available, and this -S model already carries the optional magnet for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X25S FAQ
Yes. Because a rod exits both covers, both strokes work on the rod-side area of the 32 mm bore: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal in each direction. At 1.0 MPa the maximum output is 70.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The S is the optional magnet code, so this cylinder carries the magnet that lets CMSE or DMSE reed or solid-state switches sense piston position; models ordered without -S have no magnet. The ISO 21287 compact body is hard-anodized aluminium with an S45C hard-chrome rod, a 1/8" PT port, a female M8x1.25 rod thread, a fixed TPU bumper at each end, and a mounting length about 50% shorter than an ISO 15552 profile cylinder.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X25S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.