Airtac TACED Guided Compact Cylinder TACED32X30
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X30 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X30
A double acting compact cylinder built to ISO 21287, the TACED32X30 pushes a 12 mm rod out of BOTH covers, so the 32 mm bore delivers an identical 345.6 N in each direction at 0.5 MPa (483.8 N at 0.7 MPa). Twin guide rods on the yoke stop the tooling rotating and take side load, keeping a gripper or plate square without an external guide. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs, guards and gantries.
In practice, plan on roughly 207 N of real work at 0.5 MPa (about 60% of the rating), which is a vertical lift of around 10 kg - halve that to about 5 kg for a comfortable 2:1 margin on lifting jobs. The hard-anodized aluminium body carries a roller-burnished bore, the S45C rod is hard-chrome plated, and a fixed TPU bumper at each end absorbs end-of-stroke energy. Speed range is 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED32X30 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X30 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X30
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X30 Is Used
Fixture clamping in machining cells
The 30 mm stroke and equal 345.6 N clamping from either side suit a milling fixture that needs the same clamp force whether the tooling approaches from the left or right, with the twin guide yoke holding the clamp pad square.
Bi-directional pusher on packaging lines
A rod exits both covers, so one cylinder can push cartons off a conveyor in either direction at up to 500 mm/s, and the compact body fits the narrow gap beside the belt frame.
Small-parts gripper on pick-and-place arms
With about 10 kg of vertical lift capability at 0.5 MPa and no rotation of the tooling, the yoke-driven rod carries a gripper for connector or bracket transfer between trays without an external guide.
Is the Airtac TACED Guided Compact Cylinder TACED32X30 the Right Cylinder?
At 345.6 N per side, the 32 mm bore sits between the 25 mm (206.2 N) and 40 mm (571.8 N) versions of this series - step down for lighter pick-and-place, step up when side loads grow. The 30 mm stroke is well inside the standard range for this bore, so it ships as a catalog item. This code has no S suffix, so no magnet is fitted and no CMSE / DMSE switch can be read; order the -S variant if position sensing is needed. Rod end is female M8x1.25, port thread is PT, and FB flange mounting is available. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X30 FAQ
Yes - because a rod exits both covers, both sides work on the rod-side area, so force is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in either direction. At 1.0 MPa the bore reaches a maximum of 70.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end to absorb end-of-stroke shock. Switches are not possible on this code as ordered: without the optional -S magnet there is no magnet, so CMSE or DMSE switches cannot be detected. Order TACED32X30S to enable them, and specify FB flange mounting or G ports if needed.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.