Airtac TACED Guided Compact Cylinder TACED32X30S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X30S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X30S
Double acting and double rod, the TACED32X30S pushes a 32 mm bore through a 30 mm stroke with a rod leaving both covers, so the force is identical in each direction: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. Twin guide rods ride on a yoke, so the tooling cannot rotate and small side loads are carried without an external guide. The hard-anodized aluminium body is an ISO 21287 compact build, roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarded stations.
The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches clamp straight onto the body slots for end-of-stroke signalling. A fixed TPU bumper at each end absorbs the last of the travel, the S45C hard-chrome rod is tapped M8x1.25 female, and the 1/8" port takes PT fittings. At 0.5 MPa, plan on about 207 N of usable work, which is roughly 21 kg held vertically with a sensible margin.
Airtac TACED Guided Compact Cylinder TACED32X30S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X30S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X30S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X30S Is Used
Fixture clamping in machining cells
The 30 mm stroke closes a clamp arm on aluminium housings, and the 345.6 N hold at 0.5 MPa is equal on open and close because the rod-side area works both ways.
Pusher on a bottling line
Twin guide rods keep the pusher plate square as it diverts bottles at 30-500 mm/s, with the fitted -S magnet driving a CMSE switch for PLC confirmation.
Sample press in lab automation
The compact body fits inside a benchtop enclosure where a full-length profile cylinder would not, and the M8x1.25 female rod thread accepts a custom press tip.
Is the Airtac TACED Guided Compact Cylinder TACED32X30S the Right Cylinder?
For a 30 mm stroke with equal force both ways, this 32 mm bore sits mid-range: a TACED25X30S gives 206.2 N at 0.5 MPa, while stepping up to TACED40X30S raises it to 571.8 N. Air supply is 0.15-1.0 MPa (22-145 psi) with speed 30-500 mm/s. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must stay put. FB flange mounting is available, and the fitted -S magnet pairs with CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X30S FAQ
Yes. Because a rod exits both covers, both sides see the rod-side area: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal push and pull. Peak force at 1.0 MPa is 70.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight gantries. The -S code means the magnet is fitted on this unit, so CMSE / DMSE switches mount in the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange mounting is offered.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.