Airtac TACED Guided Compact Cylinder TACED32X50S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X50S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 50mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke50 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X50S
A double acting, double-rod compact cylinder built to ISO 21287, the TACED32X50S pushes a 32 mm bore through a 50 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in extend and retract: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling rotating and take side load, so a gripper or press plate stays square without an external guide. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly on the body slots.
The hard-anodized aluminium body with a roller-burnished bore pairs with an S45C hard-chrome plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke energy. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarded cells. Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), it cycles at 30-500 mm/s from -20 to +70 C. As a working rule, plan on roughly 207 N of real work at 0.5 MPa, which lifts about 21 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED32X50S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X50S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 50 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X50S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X50S Is Used
Pick-and-place gripper actuation
The twin guide yoke keeps a small gripper jaw from twisting while the through-rod gives 345.6 N of closing force in either direction, ideal for transferring machined aluminium housings between CNC stations.
Light press and staking fixture
With 483.8 N available both ways at 0.7 MPa, the 50 mm stroke is enough to stake terminals or seat bearings in electronics assembly, and the non-rotating guides keep the punch aligned.
Position-signalled slide on a packaging line
The fitted magnet plus CMSE / DMSE switches gives mid-stroke confirmation for a carton pusher, while the short ISO 21287 body fits the narrow space beside the conveyor frame.
Is the Airtac TACED Guided Compact Cylinder TACED32X50S the Right Cylinder?
At 345.6 N per direction, this 32 mm size sits between the 25 mm bore (206.2 N) and the 40 mm bore (571.8 N) at 0.5 MPa, so step up if your tooling mass grows. The 50 mm stroke is well inside the 200 mm standard range for this bore. The female M8x1.25 rod thread on both ends suits threaded tooling plates, and FB flange mounting is available if you need a bolted face. Remember it will drift if air is lost, so add a rod lock or pilot check valve for a held load. The fitted -S magnet lets you add CMSE / DMSE switches for end-of-stroke or mid-stroke signalling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X50S FAQ
Yes. Because a rod exits both covers, both strokes work on the rod-side area, so force is equal extend and retract: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. At the 1.0 MPa maximum the cylinder reaches about 70.5 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed range is 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight jigs and guarded machines. The -S means the optional magnet is fitted on this model, allowing CMSE or DMSE reed and solid-state switches in the body slots. Construction is a hard-anodized aluminium body, S45C hard-chrome rod, 1/8" ports, female M8x1.25 threads on both rod ends, and a fixed TPU bumper at each end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X50S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.