Airtac TACED Guided Compact Cylinder TACED32X5S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X5S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 5mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke5 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X5S
Double acting and double rod, the AirTAC TACED32X5S pushes a rod out of BOTH covers, so the 32 mm bore delivers an identical 345.6 N in each direction at 0.5 MPa (483.8 N at 0.7 MPa) because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a small gripper or stamping plate stays square with no external guide. The 5 mm stroke suits short clamp-and-confirm moves at 30-500 mm/s.
The body is a hard-anodized aluminium ISO 21287 compact build, about 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarding where a full-length body cannot. The S12 hard-chrome plated rod runs in a roller-burnished bore, a fixed TPU bumper absorbs end-of-stroke shock at both ends, and the -S code on this model means the magnet is fitted, so CMSE / DMSE switches can be mounted for end-position sensing. Run it on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED32X5S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X5S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X5S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X5S Is Used
Fixture clamping confirmation
The 5 mm stroke and fitted magnet let a CMSE switch confirm the clamp on a CNC fixture closed, with 345.6 N holding force delivered equally from either side of the double-rod body.
Small-part gripper actuation
Twin guide rods keep the gripper jaws from rotating on an electronics assembly line, gripping connectors up to about 21 kg equivalent load without an external guide.
Short-stamp marking press
A 5 mm punch-and-mark move on a nameplate or date-code stamping station, where the compact body fits inside the press head and 483.8 N at 0.7 MPa is available both ways.
Is the Airtac TACED Guided Compact Cylinder TACED32X5S the Right Cylinder?
At 345.6 N per side at 0.5 MPa, plan on roughly 207 N of usable push - about 21 kg of real work - rather than the full rating. For a vertical move, the rod-side force equals about 35 kgf, so halving for a 2:1 margin lets it lift around 17 kg safely; go to TACED40 (571.8 N at 0.5 MPa) if the part is heavier, or down to TACED25 (206.2 N) for lighter pick-and-place. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay held. Mounting is FB flange, the rod end is female M8x1.25, and the fitted -S magnet pairs with CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X5S FAQ
Yes - the double-rod design exposes the rod-side area on both sides, so output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 32 mm bore takes a 1/8" port with a female M8x1.25 rod thread.
The ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the cylinder fits inside narrow guarding and jig plates. The TPU bumper at each end absorbs end-of-stroke energy without adjustment, FB flange mounting is available, and because this model carries the optional -S magnet, CMSE / DMSE reed or solid-state switches can be clamped anywhere along the body slots for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.