Airtac TACED Guided Compact Cylinder TACED32X75S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X75S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X75S
Double acting and double rod, the TACED32X75S pushes a 32 mm piston through a 75 mm stroke with a rod leaving both covers, so the force is identical in each direction: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slot for end-of-stroke signalling.
The hard-anodized aluminium body with a roller-burnished bore and an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C. As an ISO 21287 compact build it saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarding. A fixed TPU bumper at each end absorbs end-of-stroke energy. For planning, treat roughly 207 N as the usable working force at 0.5 MPa, which is about 10 kg of vertical lift with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED32X75S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X75S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X75S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X75S Is Used
Fixture clamping on CNC pallets
The 345.6 N through-rod force clamps a machining fixture from either side with equal force, and the twin guide yoke keeps the clamp pad square to the part without a separate guide.
Pusher on a packaging line conveyor
With 75 mm of stroke and identical force both ways, the cylinder diverts cartons on and off a conveyor, while the fitted -S magnet feeds CMSE switch signals back to the PLC.
Sample press in a lab automation cell
The short ISO 21287 body fits inside compact analysis enclosures, and about 207 N of usable force at 0.5 MPa presses sample trays or lidded vials gently and repeatably.
Is the Airtac TACED Guided Compact Cylinder TACED32X75S the Right Cylinder?
At 345.6 N per direction at 0.5 MPa, this 32 mm bore sits between the 25 mm TACED (206.2 N) and the 40 mm TACED (571.8 N), so step up if your clamp or lift needs more margin. The 75 mm stroke is within the standard range for bore 32, so no made-to-order build is required. Air is lost means the piston drifts - it will not hold a load on its own, so add a rod lock or pilot check valve where a held position matters. FB flange mounting is available, and the fitted -S magnet lets you add CMSE / DMSE switches for position feedback.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X75S FAQ
Because a rod exits both covers, output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), and speed 30-500 mm/s. The port is 1/8" (PT) and the rod end carries a female M8x1.25 thread.
The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight jigs and guarding. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots. A fixed TPU bumper at each end absorbs end-of-stroke energy, and FB flange mounting is available.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.