Airtac TACED Guided Compact Cylinder TACED32X80
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X80 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X80
A double acting, double rod compact cylinder built to ISO 21287, the TACED32X80 pushes and pulls with identical force because a rod leaves both covers and every stroke works on the rod-side area. At 0.5 MPa that is 345.6 N in each direction, rising to 483.8 N at 0.7 MPa, with a peak of 70.5 kgf at 1.0 MPa. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide.
The hard-anodized aluminium body is roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, which is why this 80 mm stroke version slots into tight jigs, guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the S45C hard-chrome rod with M8x1.25 female thread takes standard tooling. As a working rule, plan on about 207 N of real work at 0.5 MPa, which lifts roughly 17 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED32X80 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X80 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X80
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X80 Is Used
Push-pull fixture clamping
The equal 345.6 N force in both directions lets one TACED32X80 clamp and release a machining fixture with identical grip, and the 80 mm stroke clears the part for loading.
Synchronous gripper actuation
Twin guide rods keep a pick-and-place gripper jaw from rotating on a small electronics assembly cell, with the compact body fitting inside the machine guard.
Label press on packaging line
A 17 kg vertical press load at a 2:1 margin suits applying labels or stamps on a bottling line, with the TPU bumper softening each end of the fast 30-500 mm/s cycle.
Is the Airtac TACED Guided Compact Cylinder TACED32X80 the Right Cylinder?
At bore 32 the TACED32X80 delivers 345.6 N both ways at 0.5 MPa. If your load needs less, the TACED25X80 gives 206.2 N at the same pressure; if you need more, step up to the TACED40X80 for 571.8 N. Strokes to 100 mm are standard for this bore range, so 80 mm sits comfortably inside the catalogue. Mount with the FB flange where a fixed face is needed, and remember the cylinder does not hold position when air is lost - add a rod lock or pilot check valve for a held load. Order the -S code if you want the optional magnet for CMSE / DMSE switches; without it no sensor can be fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X80 FAQ
Yes - the double rod design means a rod exits both covers, so both strokes act on the rod-side area. Output is 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal push and pull, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the bore is 32 mm with an 80 mm stroke and 1/8" ports.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder will not. Sensing is available only if you order the optional -S magnet version, which accepts CMSE / DMSE switches; the plain TACED32X80 has no magnet. The rod end is M8x1.25 female thread, mounting is FB flange, and a fixed TPU bumper at each end absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X80
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.