Airtac TACED Guided Compact Cylinder TACED32X90S
The AirTAC Airtac TACED Guided Compact Cylinder TACED32X90S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø32mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ32 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED32X90S
Double acting with a through rod that exits both covers, the AirTAC TACED32X90S delivers 345.6 N in each direction at 0.5 MPa (483.8 N at 0.7 MPa) because both sides work on the rod-side area of the 32 mm bore. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 90 mm stroke sits inside the standard range for this bore, and the -S code means the magnet is fitted for CMSE / DMSE switches.
The body is a hard-anodized aluminium ISO 21287 compact build that saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guarding and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, the S45C rod is hard-chrome plated, and the piston seal stores its own grease for long service. Running 30-500 mm/s on air filtered to 40 um, it takes 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating and works from -20 to +70 C.
Airtac TACED Guided Compact Cylinder TACED32X90S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED32X90S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED32X90S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED32X90S Is Used
Double-sided jig clamping
The through rod clamps or presses with 345.6 N at 0.5 MPa in both directions, so one cylinder serves two tooling faces on a machining fixture without reversing the mount.
Pick-and-place flip stations
Twin guide rods keep the gripper from rotating through the 90 mm travel, holding a plastic housing square as it transfers between an assembly nest and an eject chute.
Position-verified test rigs
With the -S magnet fitted, CMSE / DMSE switches confirm end positions on a leak-test fixture, while the compact body fits inside the machine guard where a full-length profile cylinder would not.
Is the Airtac TACED Guided Compact Cylinder TACED32X90S the Right Cylinder?
At 345.6 N per side at 0.5 MPa, plan on roughly 207 N of real work rather than the full rating; expressed as lift, the rod-side area raises about 35 kg, so halve that to about 17 kg for a 2:1 vertical margin. If your load needs less force, the TACED25X90S gives 206.2 N both ways; if it needs more, step up to the TACED40X90S at 571.8 N. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must be held. FB flange mounting is available, and the fitted -S magnet lets CMSE / DMSE switches report position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED32X90S FAQ
Yes. Because a rod exits both covers, both strokes act on the rod-side area of the 32 mm bore: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, equal push and pull. The maximum force at 1.0 MPa is 70.5 kgf. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, with a fixed TPU bumper at each end.
It is an ISO 21287 compact cylinder whose short aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight gantries and guarded stations. The S means the optional -S magnet is fitted on this model, allowing CMSE / DMSE reed or solid-state switches; models without the S code carry no magnet. Rod end is a female M8x1.25 thread and the port is 1/8" (PT).
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED32X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.