Airtac TACED Guided Compact Cylinder TACED50X45S
The AirTAC Airtac TACED Guided Compact Cylinder TACED50X45S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø50mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ50 mm
- Stroke45 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED50X45S
The TACED50X45S is a double acting, double rod compact cylinder built to ISO 21287: a 16 mm rod exits both covers, so the 50 mm bore delivers an equal 881.2 N at 0.5 MPa (1233.7 N at 0.7 MPa) whether it pushes or pulls. Twin guide rods on the yoke keep the tooling from rotating and carry side load, so a gripper or press plate stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits tight jigs, guards and gantries. At 0.5 MPa the rod-side thrust of 881.2 N equates to roughly 90 kg of lift, so halving for a 2:1 margin lets you lift about 45 kg vertically with margin to spare. The S code on this model means the optional magnet is fitted, so CMSE / DMSE reed or solid-state switches can be mounted anywhere along the body slots, and a fixed TPU bumper at each end absorbs end-of-stroke energy.
Airtac TACED Guided Compact Cylinder TACED50X45S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED50X45S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 45 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 881 N |
| 0.7 MPa | 1234 N |
| Max (@1.0 MPa) | 180 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED50X45S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 50 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED50X45S Is Used
Fixture clamping on CNC pallets
The 881.2 N rod-side force at 0.5 MPa clamps aluminium or plastic workpieces on machining pallets, and the twin guide yoke keeps the clamp pad square to the fixture without a side guide.
Lift-assist ejector in packaging machines
With about 45 kg of vertical lift at a 2:1 margin, the 45 mm stroke raises carton stacks or tray nests between conveyor levels; equal force both ways simplifies up-down sizing.
Position-verified press station
The fitted -S magnet lets CMSE / DMSE switches confirm full seat on an electronics assembly press, while the short ISO 21287 body tucks the cylinder inside a guarding frame.
Is the Airtac TACED Guided Compact Cylinder TACED50X45S the Right Cylinder?
At 50 mm bore this sits in the mid-force band: a 32 mm TACED gives 345.6 N at 0.5 MPa, while a 63 mm TACED steps up to 1458.1 N, so pick 50 mm when your clamp or lift needs more than 500 N but not a 63 mm envelope. Remember the piston drifts if air is lost - it never holds position - so add a rod lock or pilot check valve for a suspended load. The female M10x1.5 rod thread on both ends, 1/8" PT ports and FB flange mounting cover most jig and gantry builds, and the fitted -S magnet means CMSE / DMSE position switches work out of the box.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED50X45S FAQ
Yes - the double rod means both sides see the rod-side area, so output is equal both ways: 881.2 N at 0.5 MPa and 1233.7 N at 0.7 MPa, with a maximum of 179.7 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 16 mm rod carries a female M10x1.5 thread on both ends with 1/8" PT ports.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder will not. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not adjustable and it never locks or brakes a load - for holding, add a rod lock or pilot check valve. FB flange mounting is available, and the S code on this model fits the optional magnet so CMSE / DMSE switches can be added.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED50X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.