Airtac TACED Guided Compact Cylinder TACED63X60S
The AirTAC Airtac TACED Guided Compact Cylinder TACED63X60S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X60S
Double acting with a rod leaving both covers, the AirTAC TACED63X60S pushes and pulls with the same 1458.1 N at 0.5 MPa (2041.3 N at 0.7 MPa), because both chambers work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The 63 mm bore takes a 16 mm rod, a 1/8" PT port and an M10x1.5 female rod thread.
The body is the ISO 21287 compact format: hard-anodized aluminium with a roller-burnished bore, S45C hard-chrome rod, and a short profile that saves about 50% of the mounting length of an ISO 15552 profile cylinder - useful in tight jigs and gantries. A fixed TPU bumper absorbs end-of-stroke energy at both ends. Because the -S code is on this model, the magnet is fitted and CMSE / DMSE switches can be mounted for position feedback. Running at 0.5 MPa, plan on roughly 874 N of usable work, and the rod will lift about 74 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED63X60S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X60S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X60S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X60S Is Used
Symmetric press-fit station
Equal 1458.1 N push and pull at 0.5 MPa suits a 60 mm stroke press or ejection head on an electronics assembly line, where the return stroke needs real force to strip a part from a mandrel.
Centering gripper on a robot cell
The twin guide yoke keeps a clamp jaw from rotating while handling 70 kg-class cast housings, so no external guide rail is needed on the fixture.
Reciprocating transfer slide
A packaging machine shuttle that must move identically in both directions between two CMSE switch positions uses the fitted -S magnet for end-of-stroke confirmation.
Is the Airtac TACED Guided Compact Cylinder TACED63X60S the Right Cylinder?
Step down to the TACED50X..S (881.2 N at 0.5 MPa) if the load is lighter, or step up to the TACED80X..S (2356.2 N) for heavier clamping; both keep the equal-force double-rod layout. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. Mount with the FB flange, and keep the optional -S magnet in mind only when CMSE / DMSE sensing is actually needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X60S FAQ
Yes - the double-rod design means a rod exits both covers, so both strokes work on the rod-side area. Output is 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, equal in push and pull, with a maximum of 297.4 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body and threaded covers, about 50% shorter in mounting length than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clamped onto the body for stroke-end signals. For exact outline dimensions, confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.