Airtac TACED Guided Compact Cylinder TACED63X80S
The AirTAC Airtac TACED Guided Compact Cylinder TACED63X80S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø63mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ63 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED63X80S
A double acting, double rod compact cylinder built to ISO 21287, the TACED63X80S pushes a 63 mm bore through an 80 mm stroke with a rod leaving both covers. Because each side sees the same rod-side area, output is identical in either direction: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa, both ways. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a gripper or press plate stays square without an external guide. The hard-anodized aluminium body pairs with an S45C hard-chrome plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke energy.
For sizing real work, plan on roughly 875 N (about 89 kg) of usable push at 0.5 MPa rather than the full rating, and expect a vertical lift equivalent near 74 kg with a 2:1 margin. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs, guarding and gantries. This -S model carries the optional magnet, so CMSE or DMSE reed and solid-state switches can be mounted along the body slots. Ports are 1/8" (PT), the female rod thread is M10x1.5, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi).
Airtac TACED Guided Compact Cylinder TACED63X80S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED63X80S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø63 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø63mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 1458 N |
| 0.7 MPa | 2041 N |
| Max (@1.0 MPa) | 297 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED63X80S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 63 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED63X80S Is Used
Symmetric press or stamping fixture
Equal 1458.1 N force on approach and return lets one cylinder both seat a bushing and retract the tooling at the same rating, with the twin guide yoke keeping the punch square under side load.
Two-sided robotic gripper on a pick cell
A rod exiting both covers drives opposing jaws from one body, so a packaging robot can grip and release with identical force and no rotation of the part, at speeds up to 500 mm/s.
Reciprocating elevator on a bottling line
The roughly 74 kg vertical-lift equivalent at a 2:1 margin suits raising and lowering bottle crates between conveyor levels, with CMSE switches on the -S magnet confirming top and bottom of the 80 mm travel.
Is the Airtac TACED Guided Compact Cylinder TACED63X80S the Right Cylinder?
At 1458.1 N per side at 0.5 MPa, the 63 mm bore sits between the 50 mm bore (881.2 N) and the 80 mm bore (2356.2 N), so pick 63 when 50 is marginal but 80 is oversized for the fixture. The 80 mm stroke is well inside the standard range for this bore, so no made-to-order stroke is needed. Remember the piston drifts if air is lost - it never locks or brakes - so add a rod lock or pilot check valve for a held vertical load. FB flange mounting is available, and this -S version already includes the magnet that CMSE / DMSE switches need, so position feedback is a bolt-on choice.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED63X80S FAQ
Yes - the double rod design means a rod exits both covers and both sides work on the rod-side area, so force is equal either way: 1458.1 N at 0.5 MPa and 2041.3 N at 0.7 MPa in both directions. At the full 1.0 MPa rating the cylinder reaches 297.4 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length cylinder cannot. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not adjustable and does not hold or brake a load. This TACED63X80S carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches mount in the body slots for position sensing. FB flange mounting is offered, ports are 1/8" PT, and the female rod thread is M10x1.5.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED63X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.