Airtac TACED Guided Compact Cylinder TACED80X15
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X15 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED80X15
The TACED80X15 is a double acting, double-rod compact cylinder built to ISO 21287: a 20 mm rod exits both covers, so the 80 mm bore delivers an identical 2356.2 N in each direction at 0.5 MPa (3298.7 N at 0.7 MPa). Twin guide rods on the yoke stop the tooling from rotating and carry side load, keeping a gripper or press plate square without any external guide. A fixed TPU bumper at each end absorbs end-of-stroke shock over the short 15 mm travel.
The hard-anodized aluminium body with an S45C hard-chrome rod saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantry stations. For planning: about 1414 N (roughly 144 kg of push) is a realistic working force at 0.5 MPa, and with a 2:1 margin the rod will lift about 120 kg vertically. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, ports are 1/4" PT and the rod end carries an M12x1.75 female thread.
Airtac TACED Guided Compact Cylinder TACED80X15 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X15 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X15
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X15 Is Used
Short-stroke press fixture
The 15 mm stroke and 2356.2 N of equal two-way force suit a stamping or marking head on an aluminium extrusion line, where the twin guide yoke keeps the die square under side load.
Lift-and-lower gantry post
With about 240 kg of raw lift at 0.5 MPa (about 120 kg at a 2:1 margin), the through-rod raises and lowers a small pallet elevator with identical force up and down.
Clamp block on a CNC fixture
FB flange mounting and the compact body, roughly half the length of an ISO 15552 profile cylinder, let the cylinder clamp a machined housing inside a crowded jig plate.
Is the Airtac TACED Guided Compact Cylinder TACED80X15 the Right Cylinder?
At 80 mm bore this is the second-strongest TACED size: 2356.2 N both ways at 0.5 MPa. Step down to the 63 mm bore (1458.1 N) for lighter clamping, or up to the 100 mm bore (3769.9 N) when the press or lift needs more muscle. The 15 mm stroke is well inside the 300 mm maximum standard stroke for this bore, so it ships as a standard build. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a load must stay put. FB flange mounting and the optional -S magnet (enabling CMSE / DMSE switches) are ordered with the model code.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X15 FAQ
Yes - the double-rod design means both sides see the rod-side area, so output is equal either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" PT ports and M12x1.75 female rod thread come as standard for this 80 mm bore.
The ISO 21287 short-body construction saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 80 mm bore fits where a full-length cylinder cannot. The twin guide rods on the yoke prevent load rotation and take side load, and a fixed TPU bumper at each end decelerates the piston. Position sensing needs the optional -S magnet ordered with the cylinder; without it no CMSE or DMSE switch can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.