Airtac TACED Guided Compact Cylinder TACED80X5S
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X5S is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke5 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED80X5S
Double acting and double rod, the TACED80X5S pushes with equal force in both directions because a 20 mm rod exits each cover and both sides work on the rod-side area. At the usual 0.5 MPa supply that is 2356.2 N either way, rising to 3298.7 N at 0.7 MPa, with a peak of 480.5 kgf at 1.0 MPa. The 80 mm bore drives a 5 mm stroke, ideal for short clamp or press-check moves inside a tight machine frame.
The body is the ISO 21287 compact format: hard-anodized aluminium with an S45C hard-chrome-plated rod, and its short build saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods on the yoke stop tooling rotation and carry side load, so a press plate or gripper stays square without an external guide. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the fitted -S magnet lets you mount CMSE / DMSE switches for end-position sensing. As a rule of thumb, plan on about 1414 N of real work at 0.5 MPa, which lifts roughly 120 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED80X5S Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X5S |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X5S
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X5S Is Used
Short-stroke press check
The 5 mm stroke and 2356.2 N both-ways force at 0.5 MPa make this cylinder a fit for verifying part seating on an automotive bracket press fixture, where the twin guide yoke keeps the probe square.
Squaring clamp on a CNC fixture
Equal 2356.2 N clamping in either direction lets one cylinder clamp a machined housing against a fixed stop, with the non-rotating yoke holding the clamp pad aligned stroke after stroke.
Gated ejection with position feedback
On a packaging line gate, the fitted -S magnet and CMSE / DMSE switches confirm open and closed positions, while the compact body slots into the guard space a longer cylinder would need.
Is the Airtac TACED Guided Compact Cylinder TACED80X5S the Right Cylinder?
At 2356.2 N per side at 0.5 MPa, this 80 mm bore suits medium-duty clamping and short-stroke pressing. If your load is lighter, the 63 mm bore delivers 1458.1 N both ways at the same pressure; if you need more, step up to the 100 mm bore for 3769.9 N. The 5 mm stroke is well inside the standard range for bore 80, so no made-to-order build is needed. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must stay held. The -S magnet is already fitted on this model, and FB flange mounting is available; ports are 1/4" PT.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X5S FAQ
Yes. Because a rod exits both covers, both strokes work on the rod-side area, so force is equal either way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, peaking at 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed 30-500 mm/s, and air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits shallow gantries and guarded pockets. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped to the body for end-position signals. The rod end is female M12x1.75, the port is 1/4" PT, and a fixed TPU bumper at each end absorbs end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X5S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.