Airtac TACED Guided Compact Cylinder TACED80X60
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X60 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 60mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke60 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED80X60
A double acting, double-rod ISO 21287 compact cylinder, the TACED80X60 pushes a 20 mm rod out of both covers, so the 80 mm bore delivers 2356.2 N in each direction at 0.5 MPa and 3298.7 N at 0.7 MPa - identical push and pull because both sides work on the rod-side area. Twin guide rods on the yoke stop the tooling rotating and carry side load, keeping a gripper or press plate square without an external guide.
The hard-anodized aluminium body with an S45C hard-chrome rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, with a fixed TPU bumper at each end. Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight gantries and guarding. Plan on roughly 1414 N (about 144 kg) of real work at 0.5 MPa, and expect it to lift about 120 kg vertically with a 2:1 margin.
Airtac TACED Guided Compact Cylinder TACED80X60 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X60 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X60
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X60 Is Used
Symmetric press fixture
Equal 2356.2 N force on approach and return suits a punching or staking head on a CNC line, where the twin guide yoke keeps the tool square to the die without extra rails.
Pallet clamp arms
A 60 mm stroke clamps and releases pallets on a packaging machine, with about 120 kg vertical lift capability per cylinder at a 2:1 margin and identical grip force both ways.
Bidirectional gate pusher
On a bottling conveyor, the through-rod drives a diverting gate from either cover, so the same 3298.7 N at 0.7 MPa is available whichever way the gate moves.
Is the Airtac TACED Guided Compact Cylinder TACED80X60 the Right Cylinder?
At 2356.2 N per side, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) sizes - step down for lighter clamping, up for heavy press work. The 60 mm stroke is within the standard range for this bore, so no made-to-order build is needed. This version has no magnet: order the -S code if you want CMSE or DMSE switch positions, and note the cylinder drifts when air is lost, so add a rod lock or pilot check valve for a held load. Mounting is FB flange, with PT ports.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X60 FAQ
Yes - the double-rod design exposes the rod-side area on both sides, so force is equal each way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the rod end carries a female M12x1.75 thread.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the fixed TPU bumper at each end absorbs end-of-stroke energy. Sensing needs the optional -S magnet code - this model has no magnet, so CMSE or DMSE switches only work if you order -S. FB flange mounting and a 1/4" PT port are standard; outline dimensions: confirm from datasheet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.