Airtac TACED Guided Compact Cylinder TACED80X90
The AirTAC Airtac TACED Guided Compact Cylinder TACED80X90 is a genuine double acting, double rod, non-rotating ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder. Twin guide rods keep the tooling from rotating.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, double rod, non-rotating
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac TACED Guided Compact Cylinder TACED80X90
A double acting, double-rod compact cylinder built to ISO 21287, the TACED80X90 pushes a 20 mm rod out of both covers so the 80 mm bore delivers an identical 2356.2 N at 0.5 MPa in either direction. Twin guide rods on the yoke stop the tooling rotating and carry side load, so a press plate or gripper stays square without an external guide. The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 90 mm stroke size slots into tight weld fixtures and gantry clamp stations. A fixed TPU bumper at each end absorbs end-of-stroke shock. For sizing, treat roughly 1414 N (about 144 kg of push) as the practical working force at 0.5 MPa, and expect around 120 kg of vertical lift capability with a 2:1 margin. The optional -S magnet enables CMSE / DMSE switches; without it no sensor can be fitted.
Airtac TACED Guided Compact Cylinder TACED80X90 Technical Specifications
| Model | Airtac TACED Guided Compact Cylinder TACED80X90 |
|---|---|
| Series | TACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod, non-rotating |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating; guide rods: stainless steel (Ø12-40) / S45C (larger). Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used). Twin guide rods carry the side load and stop the tooling rotating.
Model Code: Airtac TACED Guided Compact Cylinder TACED80X90
| TACED | ISO 21287 compact cylinder (double-rod non-rotating (twin-guide yoke)). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac TACED Guided Compact Cylinder TACED80X90 Is Used
Weld fixture clamping
The twin guide yoke keeps a clamp shoe square over the 90 mm stroke while the 2356.2 N force per side at 0.5 MPa holds steel panels firmly during robotic welding.
Press-fit assist station
With about 3298.7 N available at 0.7 MPa in both directions, the double rod ejects and retracts housings from an assembly press without any rotation of the part.
Battery tray transfer lift
The equal force both ways suits a vertical lift head on an AGV; plan for roughly 120 kg of vertical lift with margin, and add a pilot check valve to hold the tray if air drops.
Is the Airtac TACED Guided Compact Cylinder TACED80X90 the Right Cylinder?
At 2356.2 N per side at 0.5 MPa, the 80 mm bore sits between the 63 mm (1458.1 N) and 100 mm (3769.9 N) sizes; drop to 63 mm for lighter clamps or step up to 100 mm for heavy press work. The 90 mm stroke is within the 300 mm standard range for this bore. Remember the piston drifts if air is lost, so add a rod lock or pilot check valve where a load must stay put. FB flange mounting and the optional -S magnet for CMSE / DMSE switches are the usual add-ons; the female M12x1.75 rod thread is standard on the yoke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac TACED Guided Compact Cylinder TACED80X90 FAQ
Yes. Because a rod exits both covers, both strokes work on the rod-side area, so output is equal both ways: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, fluid air filtered to 40 um.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and a 1/4" port. Mounting is FB flange, and the rod end carries a female M12x1.75 thread. Position sensing needs the optional -S magnet code; only then can CMSE / DMSE switches be mounted on the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac TACED Guided Compact Cylinder TACED80X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.