The AirTAC GC200C06C2 AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06C2 is an AirTAC GC three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator set up as one air-preparation train. This configuration is built for 1/8 in PT ports, filters to the standard 40 um grade, drains the filter bowl by differential pressure, carries the standard regulator with a 0.15-0.9 MPa (20-130 psi) adjustment range, and is fitted with an external round gauge reading in psi. A mounting bracket is included.
This is a genuine AirTAC part from the GC series, which spans sizes 200 to 600 with port options from 1/8 in up to 1 in, a choice of differential-pressure, automatic or manual draining, an optional 5 um filter grade (code W), gauge scales in MPa, psi or bar, and PT, G or NPT threads. We confirm flow and other datasheet figures on request, since flow is published as curves rather than a single rating.
| Model | GC200C06C2 AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps and tool-change cylinders on a machining centre, with the psi gauge giving operators a local setpoint readout.
Prepares air for the pick-and-place and sealing cylinders on a carton packaging line, where the lubricator keeps cylinder seals running smoothly through continuous shifts.
A complete filter-regulator-lubricator train for a robotic assembly cell's air grippers and actuators, with differential-pressure draining keeping the filter bowl clear without daily manual attention.
Size up the GC series by port step: this unit is size 200 with a 1/8 in PT port; larger sizes (300/400/600) carry larger ports and suit higher air demand. Choose the drain to match maintenance access: differential-pressure draining (as fitted here) discharges automatically as flow passes, automatic (code A) drains continuously, and manual (code M) needs an operator. The standard 40 um grade suits general plant air; specify the 5 um W grade where finer filtration is needed. The round psi gauge fitted here is one option alongside the embedded square gauge and MPa or bar scales. PT is the standard thread; G and NPT are order options.
Flow for this series is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow number. Send us your application details and we will confirm the flow and sizing from the datasheet on request.
The C2 code on this model specifies the optional external round gauge with a psi scale; the embedded square gauge is the standard fitting, and scales in MPa or bar are available. All gauge options are part of the catalogue specification, so you can order the combination that matches your plant's readout convention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.