The AirTAC GC200C06C2G AirTAC F.R.L. Combination Unit, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06C2G is a three-piece AirTAC F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one unit for G1/8 (1/8 in) lines with G thread. The filter element is the standard 40 um grade, the bowl drains by differential pressure, and the regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi). A round gauge scaled in psi is fitted, a mounting bracket is included, and no reverse/check valve is fitted. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC series is available in sizes 200, 300, 400 and 600 with a choice of PT, G or NPT thread, 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, and gauge scale options. Because flow for this series is published as curves rather than a single rated figure, we confirm the datasheet and sizing figures for your application on request.
| Model | GC200C06C2G AirTAC F.R.L. Combination Unit, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps, tool-change cylinders and chip-ejection jets on a small CNC machining centre, all from one G1/8 prep point.
Supplies the air cylinders on a carton-forming and taping conveyor, keeping water and pipe scale out of the valves while the lubricator mists oil to the cylinder seals.
Conditions the supply at a manual assembly bench where air screwdrivers, riveters and blow guns share one drop, with the regulator set to the tool maker's working pressure.
Start with the size and port: 200 is the smallest step in the GC range, and the 06 position gives a 1/8 in port, so match it against the air consumption of the tools and cylinders downstream. Choose the drain to suit access: this unit uses the differential-pressure drain (the default); automatic (A) and manual (M) versions exist if you prefer unattended or scheduled draining. The 40 um element is the standard grade; specify W for the 5 um option where finer filtration is needed. The fitted round gauge is scaled in psi; square embedded gauges and MPa or bar scales are alternatives. Thread is G here, with PT as the standard and NPT orderable as a catalogue option, and a mounting bracket is included. Flow for this series is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this series as performance curves rather than a single rated figure, so we do not quote a number. Tell us your line pressure and the air consumption of the equipment downstream, and we will confirm the flow and sizing against the datasheet on request.
The C2 in the code specifies a round external gauge scaled in psi. An embedded square gauge is the standard fitting, and MPa or bar scales are available as catalogue options, so you can order the gauge style and scale that match your plant's convention.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.