The AirTAC GC200C06C2WG AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06C2WG is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one complete air-preparation set. This size 200 configuration is built for G1/8 (1/8 in) ports with G thread, carries a 5 um filter element (the finer of the two catalogue grades, in place of the 40 um standard), drains condensate by differential pressure, and is fitted with an external round gauge reading in psi. The standard regulator adjusts from 0.15-0.9 MPa (20-130 psi), maximum inlet pressure is 1.0 MPa (145 psi), and the unit operates from -5 to 70 C in non-freezing conditions. The filter bowl on this 200 size is PC (polycarbonate), and a mounting bracket is included. No reverse/check valve is fitted.
This is a genuine AirTAC part. The GC three-unit F.R.L. family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and can be ordered with manual or automatic drains, a 40 um or 5 um filter grade, square or round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C06C2WG AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic tool-changer and clamping circuits on a CNC machining centre, where the 5 um element protects precision valves from fine particulate and the lubricator keeps actuation air oil-misted.
Prepares the air feeding carton-sealing and case-erecting heads on a packaging conveyor line, holding a steady regulated pressure for consistent sealing cycles while the lubricator conditions the cylinders that drive the flap folders.
Serves a maintenance or assembly workbench where impact wrenches, riveters and air screwdrivers run off a single drop: the filter removes water and swarf, the regulator sets tool pressure, and the lubricator mists oil into the tool air.
Start with the size and port: the 200 series steps up through 300, 400 and 600, each carrying larger ports and more flow capacity, so match the size to the air demand of the downstream circuit. On this unit the drain is differential-pressure (the default); automatic (A) and manual (M) drains are orderable alternatives if the installation cannot rely on a pressure differential to purge the bowl. The filter grade here is the optional 5 um element (code W) instead of the 40 um standard - choose the finer grade where downstream equipment needs cleaner air. The fitted gauge is an external round type reading psi; embedded square gauges and MPa or bar scales are the other catalogue choices. Thread is G (BSPP) on this code, with PT as the standard and NPT available to order. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a rated flow, Cv or SCFM number. Tell us your application and required air demand and we will confirm the flow and full datasheet figures for this unit on request before you order.
The W in the model code GC200C06C2WG selects the optional 5 um filter grade in place of the 40 um standard element. The finer grade suits downstream equipment that needs cleaner air; if your application is fine with the standard grade, the same unit is available with the 40 um element by omitting the W from the code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.