The AirTAC GC200C06C2WK AirTAC F.R.L. Combination, PT1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06C2WK is an AirTAC GC-series three-piece F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one unit. This size-200 configuration is ported PT1/8 with standard PT thread, carries the 5 um filter element (code W) for finer water-and-particulate removal than the standard 40 um grade, uses a differential-pressure drain on the filter bowl, and is fitted with an external round gauge scaled in psi. The regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, a reverse/check valve (code K) is fitted, and the mounting bracket is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of ports, threads (PT standard, G and NPT to order), drain types, filter grades, gauge styles and scales, so a matching configuration can be specified for most compressed-air drops. Flow is published as curves rather than a single rated figure, so we confirm the datasheet and sizing figures on request.
| Model | GC200C06C2WK AirTAC F.R.L. Combination, PT1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the pneumatic clamps and tool-change cylinders on a machining centre, with the 5 um element protecting tight-tolerance valves.
Conditions the air at each spray-gun drop in a finishing line: water and particulate removed at 5 um, pressure set at the regulator, and a fine oil mist carried to the gun.
Supplies the taping and case-sealing cylinders on a carton-packing conveyor with clean, regulated, lubricated air, with the check valve holding the set downstream condition.
Step through the real choices in order. First pick the size and port: 200 through 600, with the port step (here 1/8 in) matched to the line size and the flow your circuit needs. Then choose the drain: differential-pressure (this unit), automatic, or manual. Choose the filter grade: 40 um standard or 5 um (code W, as fitted here) where downstream valves and cylinders need finer air. Select the gauge style and scale: embedded square gauge standard, external round gauge optional, in MPa, psi or bar (this unit: round, psi). Decide on the reverse/check valve and whether the bracket is wanted. Finally confirm the thread: PT is the standard, with G (BSPP) and NPT as order options. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves, not as a single rated figure, so there is no one l/min or SCFM number we can quote. Tell us your line pressure and the flow your circuit needs and we will confirm the sizing from the datasheet on request.
A GC is the three-piece F.R.L.: separate filter, regulator and lubricator. The W code on this unit fits the 5 um element rather than the 40 um standard grade, which suits downstream valves and cylinders that need finer air. The differential-pressure drain, round psi gauge, reverse/check valve and included bracket are the other decoded choices on this configuration.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.