The AirTAC GC200C06F2GK AirTAC F.R.L. Combination, G1/8 is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC series is AirTAC's three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one air-preparation set. This unit is the GC200 size with a G1/8 (BSPP) port, so it cleans, regulates and lubricates the compressed air feeding small pneumatic circuits. The filter section carries the standard 40 um element with a differential-pressure drain, the regulator is the standard type with a 0.15-0.9 MPa (20-130 psi) adjustment range, and the lubricator sends a controlled oil mist downstream to keep air tools and cylinders running. A round gauge with a psi scale is fitted so the set pressure is visible, and a reverse/check valve is included to hold downstream pressure if the supply drops.
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with a choice of PT, G or NPT threads, 40 um or 5 um (W) filtration, differential-pressure, automatic or manual drains, gauge scale options and reverse-valve variants. Flow figures are published as curves rather than a single rating, so ask us to confirm the datasheet and sizing for your application before ordering.
| Model | GC200C06F2GK AirTAC F.R.L. Combination, G1/8 |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the clamping cylinders and pneumatic fixtures on a CNC machining cell, where the psi gauge lets the setter verify clamp pressure at a glance.
Prepares the air supply for small pick-and-place cylinders and vacuum ejectors on a packaging conveyor, with the lubricator oil-misting the valves and actuators that cycle all shift.
Serves as the point-of-use F.R.L. on an assembly bench drop, cleaning and regulating the supply for air screwdrivers and small ratchets while the oil mist keeps the tool motors lubricated.
Start with the port step: size 200 in G1/8 suits small pneumatic circuits, and stepping up to 300, 400 or 600 gives larger ports for higher air demand - match the size to the flow your circuit needs rather than to the pipe alone. For the filter, 40 um is the standard grade for general plant air; choose the 5 um (W) element where downstream valves and cylinders need finer protection. The drain here is differential-pressure, which bleeds collected water automatically as the pressure differential rises; automatic (A) and manual (M) drains are alternatives in the same family. The regulator covers 0.15-0.9 MPa (20-130 psi) on this configuration, and the fitted round gauge reads in psi - MPa and bar scales are available if your team prefers them. The G thread is the BSPP option; PT is the catalogue standard and NPT can be ordered. A mounting bracket is included. Flow is published as curves, not a single rated figure, so send us your air demand and we will confirm the sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so there is no one number we can honestly quote. Tell us your working pressure and the air demand of the circuit, and we will confirm the sizing against the datasheet on request before you order.
C is the gauge option - a round external gauge rather than the embedded square type; 2 is the gauge scale, psi (MPa and bar scales are also available); and K means a reverse/check valve is fitted, which holds downstream pressure if the supply is interrupted. The blank drain position is the differential-pressure drain and the blank filter position is the standard 40 um element.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.