The AirTAC GC200C06LC2W AirTAC F.R.L. Combination, PT1/8, 5 um is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The AirTAC GC200C06LC2W is a three-piece F.R.L. combination: a separate air filter, pressure regulator and lubricator assembled as one air-preparation set. It cleans compressed air of water and particulate down to 5 um, regulates downstream pressure with the low-pressure type regulator, and adds oil-mist lubrication for downstream tools and actuators. This 200-size unit is fitted with a PT1/8 port, a differential-pressure drain on the filter bowl, a 5 um filter element (code W), a round pressure gauge reading in psi, and a mounting bracket.
This is a genuine AirTAC part from the GC series, which spans sizes 200 to 600 with port sizes from 1/8 to 1 inch. Filter grade, drain type, gauge style and scale, thread option (PT standard, G or NPT to order) and low-pressure or standard regulator type are all selectable within the series. Flow is published as curves rather than a single rating, so ask us to confirm sizing or any datasheet figure for your application before ordering.
| Model | GC200C06LC2W AirTAC F.R.L. Combination, PT1/8, 5 um |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
On a small assembly press, the filter strips water and 5 um particles before the valve, the low-pressure regulator holds a reduced setting for delicate clamping, and the lubricator keeps the cylinder seals running smoothly.
A filling and capping line with compact air cylinders gets clean, regulated, lubricated air from this 200-size set, protecting the small control valves that cycle thousands of times per shift.
At a workshop bench supplying impact wrenches and air ratchets, the three-unit set removes moisture and grit, holds a steady working pressure on the psi gauge, and meters oil mist into the tool air line.
Start from the flow your line needs and step up through the GC sizes (200/300/400/600), each with its matching port - here the 200 size with a PT1/8 port. Choose the filter grade: 40 um is standard, 5 um (this unit, code W) where downstream valves and cylinders need finer protection. Choose the drain: differential-pressure (this unit), automatic, or manual. Choose the gauge: embedded square or external round, with MPa, psi or bar scales - this unit carries a round psi gauge. The L in the code marks the low-pressure regulator type; confirm its adjustment band with us if your line runs at reduced pressure. Thread is PT as standard, with G (BSPP) and NPT available as order options, and a bracket is included.
Because flow is published as curves rather than a single rated figure, send us your application details and we will confirm sizing against the datasheet before you order.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number on the page. Tell us your line pressure and the equipment you are feeding, and we will confirm the sizing against the datasheet on request before you order.
L marks the low-pressure type regulator, intended for lines running below standard working pressure; its exact adjustment range is not published on the datasheet, so confirm it with us. W marks the 5 um filter element instead of the standard 40 um. The unit also carries a round psi gauge, a differential-pressure drain and a PT1/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.