The AirTAC GC200C06LF2 AirTAC F.R.L. Combination PT1/8 Low Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06LF2 is an AirTAC GC series three-piece F.R.L. combination: a separate air filter, a pressure regulator and an oil-mist lubricator assembled as one conditioning unit. This configuration is size 200 with a PT1/8 port, a 40 um filter element, a differential-pressure drain on the filter bowl, a low-pressure type regulator, and an embedded square gauge reading in psi. The polycarbonate bowl keeps the water and particulate level visible at a glance, and the mounting bracket is included. It filters water and particulate from compressed air, holds a set downstream pressure, and carries oil mist to downstream air tools and actuators.
This is a genuine AirTAC part. The GC family spans sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and options that include automatic or manual drains, a 5 um filter element (code W), alternate gauge scales, G or NPT threads, and a reverse/check valve. Rated flow for this series is published as curves rather than a single figure, so ask us to confirm the flow and datasheet figures for your application before ordering.
| Model | GC200C06LF2 AirTAC F.R.L. Combination PT1/8 Low Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds filtered, regulated and lubricated air to the small pneumatic cylinders and grippers that clamp, fold and eject cartons on a packaging conveyor, keeping moisture and debris out of the valve stack.
Conditions the air feeding a workbench of pneumatic clamps and air screwdrivers, where the low-pressure regulator holds a gentle set pressure and the lubricator carries oil mist to the tools.
Supplies cleaned and pressure-stabilised air to a compact spray or finishing station, with the 40 um element catching particulates and the bowl draining condensate before it reaches the gun.
Start with the port step: this unit is size 200 with a PT1/8 port, the smallest in the GC range; step up to size 300, 400 or 600 when the line needs a larger port and more flow. The filter element here is the standard 40 um grade; specify the W option for a 5 um element when finer particulate removal matters. The differential-pressure drain bleeds accumulated water automatically as the pressure differential rises; automatic (code A) and manual (code M) drains are available if you prefer a different approach. The fitted square gauge reads in psi, and MPa or bar scales can be ordered instead. The thread is PT as standard; G (BSPP) and NPT versions are catalogue options to order. Note that the regulator in this unit is the low-pressure type, so confirm the control range suits your circuit. Because rated flow is published as curves rather than a single number, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for the GC series as curves rather than a single rated figure, so we do not quote a number here. Tell us your line pressure and the flow your application needs, and we will confirm the sizing against the datasheet curves for this exact PT1/8, size 200 combination before you order.
The L in the model code marks this as the low-pressure type regulator rather than the standard one, intended for circuits that hold a lower set pressure. Its exact adjustment range is not published on the sheet we work from, so confirm the range you need with us and we will verify it against the datasheet.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.