The AirTAC GC200C06LF2G AirTAC F.R.L. Combination G1/8 Low-Pressure is a genuine G-series three-unit F.R.L. combination: a separate filter, a separate regulator and a separate lubricator assembled as one air-preparation station. It has See datasheet ports, a 40 µm element, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi).
The GC200C06LF2G is an AirTAC GC-series three-unit F.R.L. combination: a separate air filter, pressure regulator and oil-mist lubricator assembled as one supply package. This configuration is the GC200 size with a G1/8 (1/8 in) port in G (BSPP) thread. The filter element is the standard 40 um grade with a differential-pressure drain in the bowl, the regulator is the low-pressure type with a square gauge scaled in psi, and the lubricator mists oil into the downstream air line. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GC family is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in up to 1 in, and options include the 5 um filter element (code W), automatic or manual drains, alternative gauge scales (MPa, psi or bar) and G or NPT thread variants. Flow is published as curves rather than a single rated figure, so ask us to confirm the datasheet figures for your application before ordering.
| Model | GC200C06LF2G AirTAC F.R.L. Combination G1/8 Low-Pressure |
|---|---|
| Series | GC200 F.R.L. combination |
| Composition | Filter + regulator + lubricator (3 units) |
| Port size | See datasheet (PT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — factory standard, Factory standard scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). The combination has no separate bracket code — the three units couple together with their own mounting hardware. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GC200 | G-series F.R.L. combination, 200 body — sets the port range. |
|---|---|
| C0 | Port size See datasheet. This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| (blank) | Pressure gauge fitted (blank). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, gauge, shape, scale, grade, thread, reflux — there is no bracket position on a combination. Constituent units, orderable separately as spares: GF200-C0 filter, GR200-C0 regulator and GL200-C0 lubricator.
A GC is three separate units, so the filter and the regulator can each be serviced or replaced on their own. A GFC is the two-unit set, where filtering and regulating share one body — shorter, but the two functions come as one part. Both filter, regulate and lubricate.
| This model | GC200 · See datasheet · 40 µm |
|---|---|
| One size up | GC300 |
| Two-unit equivalent | GFC200-C0 |
| Build order | Filter → regulator → lubricator |
Feeds clean, regulated and lubricated air to impact drivers, air ratchets and clamping fixtures at a final-assembly cell, protecting tools and actuators on one compact 1/8 in drop.
Supplies the pneumatic pushers, stop gates and capping cylinders along a beverage conveyor, where the filter removes line water and the lubricator keeps cylinder seals working smoothly.
Conditions the shop-air feed to a CNC toolchanger and workpiece clamps, giving the low-pressure regulated setting and oil mist those circuits need at the machine inlet.
Start with the size and port: the 200 size with a 1/8 in port suits compact supply points, while larger sizes (300/400/600) carry bigger ports and more flow - match the step to the air demand of the served equipment. This unit carries the standard 40 um element; choose the W option if finer 5 um filtration is needed. Drain choice matters: the differential-pressure drain fitted here passes liquid when the pressure differential rises, while automatic (A) or manual (M) drains suit unattended or periodically checked installations. The square gauge is scaled in psi; MPa and bar scales are available. G (BSPP) thread is fitted here; PT is the standard thread and G or NPT are catalogue options to order. A mounting bracket is included.
Because flow is published as curves and not as a single rating, ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowls must not be cleaned with solvents — wipe them with a dry cloth. The lubricator adds an oil mist downstream of the regulator. If any branch of the line must stay oil-free, take that branch off before the lubricator, or use a GR200-C0 regulator with a GF200-C0 filter on that branch.
AirTAC publishes flow for this series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and datasheet figures for this exact model on request before you order.
The L in the code marks the low-pressure regulator type, intended where downstream equipment needs a lower setting than a standard regulator delivers; the exact adjustment range for the low-pressure type is not published, so we confirm it on request. The F2 marks the fitted square gauge scaled in psi, and MPa or bar scales can be ordered instead.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.